STX V14 standard bulkhead set, metal, RJ45 jack A Cat.6A, rectang. mount.-cutout
Technical attributes
| Article name | CU-CN STXV14 bhdset mo C6A mtl |
|---|---|
| Description | STX V14 standard bulkhead set |
| insert | RJ45 Modul A Cat.6A |
| Remarks | rectangular mounting cutout |
| Mount. dim. | Z132 |
Description of the Series/Product Category
Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.
For the installation of data networks as per IEC 61918, IEC 61784-5 and PROFINET system guide, Telegärtner recommends for harsh environments the Push-Pull connector of Variant 14 acc. to IEC 61076-3-117. Moreover this connector series is compliant to the requirements of AIDA (Automation Initiative of the German Automotive Industry) guaranteeing protection class IP67. The modular principle - which is used on all connectors with STEADYTEC®-Technology - allows us to offer a wide range of products. Benefit from maximum flexibility and choose the insert you need! The RJ45 inserts stand out due to high power reserves and offer transmission characteristics up to 10 Gbit Ethernet. The FO plug and bulkhead inserts are available for GOF and POF/PCF fibres and provide the most suitable solution for every application.
Performance characteristics
NBR aiguilette at the protection cap
bay for marking labels
bulkhead version having rectangular cutout for mounting with M3 screws
bulkhead version having round cutout for central screw mounting
rugged zinc-diecast housing, nickel-plated
protection class IP67
plug housing suitable for cables with diameter 5-10 mm
pre-assembled plugs and set products for simple assembly
available with RJ45 Cat.6A, Cat.6 Class EA, USB or FO insert
Mechanical attributes
| Cu-Conductor diameter: stranded | AWG 26/7-22/7 |
|---|---|
| Housing | metal |
| Mating Requirements Cu-Conductor diameter: solid | AWG 26/1-22/1 |
| Mating Requirements Cu-Conductor diameter: stranded | AWG 26/7-22/7 |
| shielding contact | advanced resistance to vibration and shock by the use of 4 springs at the shroud |
| Colour coding | EIA/TIA A; EIA/TIA B; Profinet |
| strain relief/shield | getrennt |
| Construction | - |
| Material: housing | zinc diecast |
| Overall cable diameter | 5,5 - 10 mm |
Thermal and climatic attributes
| Temperature range [°C] | -40/ 80 |
|---|
Elecrical attributes
| PoE according to IEEE802.3af | Adequate for 4 Pair Power over Ethernet |
|---|
Transmission properties
| Category 6^A (Component) | ISO/IEC 11801, DIN EN 50173-1 |
|---|---|
| Class E^A (Permanent Link) | ISO/IEC 11801, DIN EN 50173-1 |
| Class E^A (Channel) | ISO/IEC 11801, DIN EN 50173-1 |
| Class E (Channel with Coupler Cat.6) | - |
| Class D (Channel with Coupler Cat.5e) | - |
| Gigabit Ethernet acc. to IEEE 802.3 | fulfilled |
| 10 Gigabit Ethernet acc. to IEEE 802.3an | fulfilled |
| Category | Cat.6 (de-embedded geprüft) |
Norms
| Connectors | IEC 61076-3-117 |
|---|---|
| Degrees of protection provided by enclosures (IP code) | IEC 60529 |
Environmental requirements
| Ambient temperature | -40° C to +85° C |
|---|
