AMJ Coupler K Cat.5e, f-f
AMJ Coupler K
Item number: 100023227(Old item number J00029K0051)
AMJ Coupler K Cat.5e, f-f
AMJ Coupler K Cat.5e, f-f
Technical attributes
| Article name | CU-CN AMJ-K co C5 f-f |
|---|---|
| Description | suitable for Class E Channel, 1 Gigabit Ethernet |
| Remarks | suitable for RJ45/11/12 plugs |
| Mount. dim. | Z121 |
Description of the Series/Product Category
Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.
Mechanical attributes
| Material: contact spring finish | min. 0,8 µm (µin) Au on 1,2 µm (50µin) Ni |
|---|---|
| Material: housing rear part | zinc diecast |
| Material: insulation body | PA UL94 V2 pure white |
| Material: shield | German silver |
| Material: housing | zinc diecast |
| Material: snap-fit | zinc diecast |
| Material: PCB | FR4 |
| Material: PCB finish | chem. tin-plated |
| Material: contact spring | spring steel |
| Insertion force | ≤ 30 N |
| Life (mating cycles RJ45, RJ12, RJ11) | ≥ 750 |
| Material: shield | German silver |
| Material: insulators | PC UL94 V0 |
Elecrical attributes
| Contact resistance | ≤ 20 mΩ |
|---|---|
| Insulation resistance | ≥ 500 MΩ |
| Voltage proof: contact-contact | ≥ 1000 V |
| Voltage proof: contact-shield | ≥ 1500 V |
| Current carrying capacity at 50°C | 1 A |
| PoE+ acc to IEEE 802.3at | Adequate for Power over Ethernet+ |
| Transfer Impedanz |
for 1 MHz < 100mΩ for 10 MHz < 200mΩ for 80 MHz < 1600mΩ |
Transmission properties
| Gigabit Ethernet acc. to IEEE 802.3 | Adequate for Gigabit Ethernet |
|---|---|
| Class D (Channel with Coupler Cat.5e) | ISO/IEC 11801, DIN EN 50173-1 |
Norms
| Connectors | IEC60603-7-3 |
|---|---|
| Generic cabling systems | ANSI/TIA/EIA-568-C.2 ISO/IEC 11801 EN50173-1 |
Environmental requirements
| Ambient temperature | -40°C bis / to +70°C |
|---|---|
| Protection against particulate ingress | IP2X |
| Protection against water / immersion | IPX0 |
