STX V1 LC duplex plug set, singlemode
STX V1 LC duplex plug set, singlemode
Technical attributes
| Article name | FO-C plg LCD SM cer STXV1 |
|---|---|
| Description | STX V1 FO plug set |
| Housing | plastic |
| Connector type | LC Duplex |
| Fiber type | Singlemode |
| Remarks | without bend protection |
Downloads
Description of the Series/Product Category
Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.
Modern industrial and building wiring envisions linking the office network with the manufacturing network andits subordinate production cells and machinery. The applicable standard for this, ISO/IEC 24702 resp. EN 50173-1 and -3, are intended for situations with a high level of bidirectional traffic between the administration and manufacturing areas whereby realtime transmissions with high security, 100% availability and simultaneous high investment security must all be guaranteed. The increasing interconnection of machinery, equipment and measuring instruments in the production area using connectors already known from office wiring applications demands that these be adapted to the higher stresses presented by the contamination-prone, rough industrial environment. Aside from a variety of RJ45, IP67 M12 D- and X-coded connectors, Telegärtner therefore also offers designs for connecting glass and polymer fibres in order to meet this challenge.
Connectors for modern industrial applications need to be designed in such a way that they simplify processes and cope with faster data transmission. Telegärtner recommends the connectors of Variant 1 for generic cabling of factory automation machinery (Automation Island, ODVA) acc. IEC 61918 in a robust metal or plastic design. The connectors of Variant 1 are standardized in the IEC 61076-3-106, designed to meet the demands of harsh industrial environments, guaranteeing protection class IP67 whether mated or unmated (using the IP67 protection cap). Furthermore, the modular principle - which is used on all connectors with STEADYTEC®-Technology allows us to offer a wide range of products. Benefit from maximum flexibility and choose the insert you need! The RJ45 plug and bulkhead inserts stand out due to high power reserves and offer transmission characteristics of Class EA acc. to ISO/IEC 11801. The FO plug and bulkhead inserts are available for GOF and POF-fibres and provide the most suitable solution for every application.
Performance characteristics
storage of cables with diameter 5...10 mm
simple mounting of bulkheads through a central screwed gland or four screws
NBR aiguilette at the protection cap
bay for marking labels
with bend protection to prevent cables from being excessively bent
rugged zinc diecast or plastic housing
protection class IP67
Variant 1 acc. to IEC 61076-3-106
pre-assembled plugs and set products for simple assembly
available with RJ45 Cat.6A, Cat.6 Class EA, USB or FO insert
Mechanical attributes
| Bauform | connector type LC acc. to IEC 61754-20 |
|---|---|
| Durability (Matings) | ≥ 1000 |
| Hex crimp size for strain relief | 3.24 x 10 mm |
| strain relief | ≥ 100 N |
| Material: connector ferrule | Zirkonia ceramic |
| Material: adaptor split sleeve | Zirkonia ceramic |
| Material: plug housing, boot, dust caps | brass, 5 µm Ni plated |
| Material: adaptor housing | brass, 5 µm Ni plated |
| Colour: connector housing / adaptor housing | Multimode: beige, blau, türkis, schwarz, violett; Singlemode: blau; Singlemode APC: grün |
Thermal and climatic attributes
| Operating temperature in °C | -20 / 80 |
|---|---|
| Storage temperature in °C | -40° to 90° C |
Optical attributes
| Insertion loss: plug (factory assembly) | Multimode: max. 0.4 dB1; Singlemode/Singlemode APC: max. 0.5 dB1 |
|---|---|
| Insertion loss: Adaptor | Multimode/Singlemode: max. 0.2 dB1; Singlemode APC: 0.5 dB1 |
| Return loss: plug (factory assembly) | Multimode: min. 30 dB²; Singlemode: min. 40 dB²; Singlemode APC: min. 60 dB² |
