T-Adaptor S, 10/100BT/ISDN light grey RAL 7035
T-Adaptor S, 10/100BT/ISDN light grey RAL 7035
Technical attributes
| Article name | CU-CN T-adapt 10/100 BT/ISDN s |
|---|---|
| Remarks | T-Adaptor S, 10/100BT/ISDN |
| Type | shielded, output 1x 10/100BaseT / 1xISDN |
| Colour | light grey RAL 7035 |
Downloads
Description of the Series/Product Category
Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.
The adaptor, which is built into a plastic housing, divides an attached 8-wire RJ45 output into two sockets, each of which then has 4-wire pin assignment. The 15 cm long connecting cable is provided with an RJ45 plug which is inserted into the output of the box and/or the distributor. The connecting cables to the subscriber and/or to the next distributor socket are then inserted into the two RJ45 sockets at the adaptor output. The outputs to the subscribers are marked by coloured mounting symbols for data and/or telephone connections. A labelling plate under a transparent cover offers space for marking the outputs. On the underside of the adaptor housing there is a label with information on the pin assignment so that the distributor structure can be precisely traced in case additional action is required.
The Modular T-Adaptors make it possible to duplicate connections without having to intervene in the existing network structures with cable sharing. This solution is available for the network topologies Ethernet, Token Ring and Ethernet/ISDN combinations in different versions shielded or unshielded. Important: Each adaptor has to be connected to the patch panel (2 inputs from the hub) and to the data outlet (2 outputs to the terminals)!
When all of the available connections in a data network are occupied problems arise to be sure, as soon as new subscribers are added. One solution would be to lay additional cables as well as to install further distribution panels and boxes. But this sometimes proves to be very difficult and costly because of poor accessibility to installation ducts.
Performance characteristics
moulded cable boot
connection lead 150 mm with strain relieve, RJ45-plug with latch protection
marking label with transparent plastic cover
shielded and unshielded
plastic housing, halogen-free, colour light grey RAL 7035
indication of the outputs by plug-in symbols for data and telephone application
label with wiring scheme at the bottom
for the partitioning of an 8-wire RJ45 jack to 4-wire applications such as 2x10/100BaseT, 2xToken Ring and 10/100BT/ISDN