UMJ coupler K Cat.6, f-f, blister package (24 pcs.)
UMJ coupler K Cat.6, f-f, blister package (24 pcs.)
Technical attributes
| Article name | CU-CN UMJ-K co C6 f-f alpwt |
|---|---|
| Type | blister package (24 pcs.) |
| Remarks | suitable for RJ45/11/12 plugs |
| Mount. dim. | Z121 |
Downloads
Description of the Series/Product Category
Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.
Performance characteristics
unshilded
10 Gigabit Ethernet compliant (IEEE 802.3an)
universal, world-wide available installation dimension for mounting cut-outs: 19.3 x 14.7 mm
unshielded
universal, world-wide available installation dimension for mounting cut-outs: 19.3 x 14.7 mm
fully-automated production of Class EA 500 RJ45 core to guarantee a uniformly high quality standard (transmission characteristic values)
Mechanical attributes
| Insertion force | ≤ 20 N |
|---|---|
| Life (mating cycles RJ45, RJ12, RJ11) | ≥ 750 |
| Cu-Conductor diameter: solid | 0.41 - 0.64 mm AWG 26/1 - AWG 22/1 |
| Cu-Conductor diameter: stranded | 0.46 - 0.76 mm AWG 27/7 - AWG 22/7 |
| Core Diameter | 0,9 - 1,6 mm |
| Reusable IDC for AWG 22/1 and AWG 22/7 | ≤4 cycles |
| Reusable IDC für AWG 23/1 - AWG 26/1 | ≤10 cycles |
| Reusable IDC for AWG 24/7 - 27/7 | ≤10 cycles |
| Cable diameter | max. 9 mm |
| Material: insulating housing | - |
| Material: shield | German silver |
| Material: insulators | PC UL94 V0 |
| Material: contact spring finish | min. 0,8 µm (µin) Au on 1,2 µm (50µin) Ni |
| Material: contact IDC termination | CuNi2Si |
| Material: IDC termination finish | min. 3-6 µm (120-240 µin) Sn |
| Material: housing | PC GF20 UL94 V0 RAL 9010 pure white |
| Material: snap-fit | PC GF20 UL94 V0 RAL 9010 pure white |
| Material: PCB | FR4 |
| Material: PCB finish | Cu 35/35 chem. tinned |
| Material: contact spring | phosphor bronze tinned |
| Material: cable clamp | PC UL94 V0 |
| Durability (Matings) | ≥ 750 |
| Mating Face | DIN IEC 60603-7-2 |
| Material: contact finish | min. 0,8 µm Au on 1,2 µm Ni |
Thermal and climatic attributes
| UL | E244889 |
|---|---|
| Tested / classified in accordance with DIN IEC 60068-1 | 25/070/21 |
Elecrical attributes
| Contact resistance | ≤ 20 mΩ |
|---|---|
| Insulation resistance | ≥ 500 mΩ |
| Voltage proof: contact-contact | ≥ 1000 V= |
| Voltage proof: contact-shield | ≥ 1500 V, DC |
| Current carrying capacity at 50°C | 1 A |
| PoE+ acc to IEEE 802.3at | Adequate for Power over Ethernet+ |
| Working current | 1 A |
Transmission properties
| Category 6^A (Component) | ISO/IEC 11801, DIN EN 50173-1 |
|---|---|
| Class E^A (Permanent Link) | ISO/IEC 11801, DIN EN 50173-1 |
| Class E^A (Channel) | ISO/IEC 11801, DIN EN 50173-1 |
| Class E (Channel with Coupler Cat.6) | - |
| Class D (Channel with Coupler Cat.5e) | - |
| Gigabit Ethernet acc. to IEEE 802.3 | fulfilled |
| 10 Gigabit Ethernet acc. to IEEE 802.3an | fulfilled |
| Cat.6 | TIA/EIA-568-B.2-1; ISO/IEC 11801 2nd edition; EN 60603-7-4 |
Norms
| Connectors | IEC 60603-7-51 |
|---|
Environmental requirements
| Ambient temperature | -40° C to +85° C |
|---|
