STX USB coupler 3.0 type A, f-f
STX USB coupler 3.0 type A, f-f
Technical attributes
Article name | CU-CN STX USB 3.0 co f-f typeA bk |
---|---|
Description | STX USB coupler 3.0 type A, f-f |
UL listed | E244889 |
Downloads
Description of the Series/Product Category
Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.
For the installation of a telecommunications outlet in harsh environments such as on the outside of control cabinets, operation terminals or junction boxes Telegärtner provides a communication interface in protection class IP65. The modular principle - which is used on all connectors with SteadyTec®-Technology - allows us to offer a wide range of products. Benefit from maximum flexibility and choose the insert you need! The RJ45 inserts stand out due to high power reserves and offer transmission characteristics up to 10Gbit Ethernet. The FO plug and bulkhead inserts are available for GOF and POF-fibres and provide the most suitable solution for every application. In addition USB inserts are available.
Performance characteristics
for material thickness 1-5 mm
captive protective cap attached to the sea
rugged PA-housing UL94V0
communication interface in protection class IP65
available with RJ45 Cat.6A, Cat.6 Class EA, USB or FO insert
round cutout according to mounting dimension Z122 for central screw mounting
Mechanical attributes
Material: jack housing | PC UL94 V0 black |
---|---|
Material: jack housing | PBT UL94 V0 |
Material: contacts | Phosphorbronze |
Material: shield | Phosphor Bronze, min 1 µm Ni |
Insertion force | ≤ 66 N |
Durability (Matings) | ≥ 1500 |
Thermal and climatic attributes
Temperature range [°C] | -40/ 70 |
---|
Elecrical attributes
Current carrying capacity power contacts at 90° C | ≤ 3 A |
---|
Transmission properties
Universal Serial Bus Spec. | Universal Serial Bus Spec. Revision 2.0/3.0 |
---|
Norms
Connectors | IEC 61076-3-107 |
---|---|
Degrees of protection provided by enclosures (IP code) | IEC 60529 |
Environmental requirements
Protection against particulate ingress | IP2X |
---|---|
Protection against water / immersion | IPX0 |
Ambient temperature | -40° C to + 70° C |
Rapid change of temperature | -40° C to + 70° C / 25 cycles t=30 min. |
Climatic damp heat | +25° C / +65° C / 93% RH // -10° C / 21 cycles |
Flowing mixed gas | +25°C / 73% RH / 4 days, H2S / SO2 |