STX LC-D adaptor SM
STX LC-D adaptor SM
Technical attributes
Article name | FO-C coupl LCD SM |
---|---|
Description | STX FO adaptor |
Connector type | LC Duplex |
Fiber type | Singlemode |
Downloads
Description of the Series/Product Category
Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.
Modern industrial and building wiring envisions linking the office network with the manufacturing network andits subordinate production cells and machinery. The applicable standard for this, ISO/IEC 24702 resp. EN 50173-1 and -3, are intended for situations with a high level of bidirectional traffic between the administration and manufacturing areas whereby realtime transmissions with high security, 100% availability and simultaneous high investment security must all be guaranteed. The increasing interconnection of machinery, equipment and measuring instruments in the production area using connectors already known from office wiring applications demands that these be adapted to the higher stresses presented by the contamination-prone, rough industrial environment. Aside from a variety of RJ45, IP67 M12 D- and X-coded connectors, Telegärtner therefore also offers designs for connecting glass and polymer fibres in order to meet this challenge.
Mechanical attributes
Bauform | connector type LC acc. to IEC 61754-20 |
---|---|
Durability (Matings) | ≥ 1000 |
Hex crimp size for strain relief | 3.24 x 10 mm |
strain relief | ≥ 100 N |
Material: connector ferrule | Zirkonia ceramic |
Material: adaptor split sleeve | Zirkonia ceramic |
Material: plug housing, boot, dust caps | brass, 5 µm Ni plated |
Material: adaptor housing | brass, 5 µm Ni plated |
Colour: connector housing / adaptor housing | Multimode: beige, blau, türkis, schwarz, violett; Singlemode: blau; Singlemode APC: grün |
Thermal and climatic attributes
Operating temperature in °C | -20 / 80 |
---|---|
Storage temperature in °C | -40° to 90° C |
Optical attributes
Insertion loss: plug (factory assembly) | Multimode: max. 0.4 dB1; Singlemode/Singlemode APC: max. 0.5 dB1 |
---|---|
Insertion loss: Adaptor | Multimode/Singlemode: max. 0.2 dB1; Singlemode APC: 0.5 dB1 |
Return loss: plug (factory assembly) | Multimode: min. 30 dB²; Singlemode: min. 40 dB²; Singlemode APC: min. 60 dB² |