STX V6 RJ45 plug set
STX V6 RJ45 plug set
Technical attributes
Article name | CU-CN STXV6 plgset 24-27 C6A |
---|---|
Remarks | AWG24-27 |
Downloads
Description of the Series/Product Category
Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.
Connectors for modern industrial applications need to be designed in such a way that they simplify processes and cope with faster data transmission. Telegärtner recommends the connectors of Variant 6 for genericcabling of factory automation machinery (Automation Island, ODVA) acc. IEC 61918 and fieldbus installation acc. to IEC 61784-5 in a robust plastic design. The connectors of Variant 6 are standardized in the IEC 61076-3-106, designed to meet the demands of harsh industrial environments, guaranteeing protection class IP67 when mated. The locking clasps allow easy, tool-less opening as well as a secure locking with protection class IP67. The RJ45 plug and bulkhead inserts stand out due to high power reserves and offer transmission characteristics of Class EA acc. to ISO/IEC11801.
Performance characteristics
Variant 6 acc. to IEC 61076-3-106
connector for Automation Island acc. to IEC 61918
8-way contact for 10 Gigabit-Ethernet
locking clasp to prevent accidental detachment
360° shield connection
inner and outer conductor crimped in one single operation using the profi crimping tool N00001A0002
Fire rating UL94 V0
protection class IP67
Mechanical attributes
Material: contacts | phosphor bronze tinned |
---|---|
Material: PCB | FR4 UL 94 V0 |
Material: piercing contacts | phosphor bronze tinned |
Material: shield contact | brass, nickel-plated |
Material: wire pair presorting | PC UL94 V0 white |
Material: uplock hook | PBT UL94 V0 |
Material: cable clamp | PBT UL94 V0 |
Material: protection cap | PBT UL94 V0 |
Material: housing | PA6 UL94 V0 |
Material: contacts | Phosphor Bronze |
Material: contact finish | Ni2.54Au0.8 |
Material: cable gland | PA6 UL94 V0 |
Material: connector housing | PC UL94 V0 |
Material: seal | CR Neoprene |
Material: O-ring | HNBR 70 Shore A |
Material: shielding housing | 0.5 mm brass, 2 µm Ni |
Insertion force | ≤ 100 N |
Durability (Matings) | ≥ 750 |
Reusable contacts | ≤10 cycles |
Cu-Conductor diameter: solid | Ø 0.36 - 0.51 mm (AWG27/1-24/1) |
Cu-Conductor diameter: stranded | Ø 0.46 - 0.61 mm (AWG27/7-24/7) |
Mating Requirements Cu-Conductor diameter: stranded | 0.61 - 0.78 mm (AWG24-22/19) |
Core Diameter | 1,0 - 1,6 mm |
Mating Requirements: core diameter | Ø 0.85 - 1.02 mm |
Mating Requirements Cu-Conductor diameter: solid | Ø 0.36 - 0.51 mm (AWG27/1-24/1) |
Mating Requirements Cu-Conductor diameter: stranded | Ø 0.46 - 0.61 mm (AWG27/7-24/7) |
Mating Requirements: overall cable diameter | Ø 5.5 - 6.2 mm |
Core Diameter | Ø 0.85 - 1.02 mm |
Cable diameter | Ø 5.5 - 6.2 mm |
Thermal and climatic attributes
Temperature range [°C] | -40/ 85 |
---|---|
UL | E244889 |
Tested / classified in accordance with DIN IEC 60068-1 | 25/070/21 |
Elecrical attributes
Working current at 50° C | 1 A |
---|---|
Contact resistance | ≤ 20 mΩ |
Insulation resistance | ≥ 500 mΩ |
Voltage proof: contact-contact | ≥ 1000 V |
Voltage proof: contact-shield | ≥ 1500 V |
Working current | 1 A |
Interference proof | EN50082-2 |
Emission proof | EN50081-2 |
Current carrying capacity at 50°C | 1 A |
Transmission properties
10 Gigabit Ethernet acc. to IEEE 802.3an | fulfilled |
---|---|
Category | Cat.6 nach DIN EN 60603-7-5 |
Norms
IEC 61076-3-106 Variant 6 | Connector for electronic equipments part 3 - 106: 8-way connectors for industrial requirements |
---|---|
IEC 60529 | Degree of protection by housing (IP code) |
DIN EN 60603-7-5 | Connector for electronic equipments part 7-5: detail specification for 8-way shielded, free and fixed connectors, for data transmission with frequencies up to 250 MHz |
Generic cabling systems | ISO/IEC 11801; EN 50173-1; ISO/IEC 24702; IEC 61918 |
Connectors | IEC 60603-7-51; IEC 61076-3-106 |