All-round Talent for Optical Networks
With its compact dimensions of 390 x 260 x 100 mm the wall distributor painted in RAL 7035 allows splicing of up to 120 fibres. Fibre optic cables with a diameter of max. 20 mm can be fixed via four cable inlets at the top and bottom with metric screw cable glands in the housing. Using four 3 HU /7 TU front plates, it is possible to accommodate up to 48 FO simplex or duplex adaptors in the distributor.
The four separate front plates also enable mixed equipping with different adaptor types or for different fibre types. The housing has two doors with different closures so that the splicing area can be protected against possible unauthorised access. The FO patch cables exit the housing at top and bottom, foam rubber strips prevent foreign bodies from penetrating the housing. Customised solutions such as the connection of hybrid Power & FibreOptic cables in mobile radio or the accommodation of active media converters for Fibre-to-the-Home/Building networks in the BEP (Building Entry Point) are implemented individually and project-specifically for the respective network requirement.
Technical data and order information
|Housing||Steel sheet 1 mm, powder coated, light gray RAL 7035|
|Dimensions||390 x 260 x 100 mm|
|Cable entry||M25x1,5 for cable diameter 6 - 20 mm|
4 x 3 HE / 7 TE, aluminium anodized for ST, SC, E2000, SC Duplex, LC Duplex
|Housing with 2 swivel doors, separately lockable, each two cable entries on top/bottom for M25; max. 5 splice cassettes|