Modular Wall Distributor SAM
In the wall distributors painted in RAL 7035 you can splice up to 8x4 fibres on SC cassettes or 4x12 fibres on SE cassettes. The SAM fibre management enables fibre overlengths to be laid and the 250 μ fibres to be laid safely and protected to the cassettes. Fibre optic cables with a diameter of max. 20 mm can be fixed via three cable inlets each at the top and bottom with metric screw cable glands in the housing.
Using four 3 HU/7 PU front plates, it is possible to accommodate up to 48 FO adaptors of types ST, SC, E2000 or LC in the distributor. The four separate front plates also enable mixed equipping with different adaptor types or for different fibre types. The housing has two removable doors with different closures so that the splicing area can be protected against possible unauthorised access.
The FO patch cables or pre-assembled TICNET lines can be fed out of the housing at either top or bottom. Foam rubber strips prevent foreign bodies from penetrating the housing.
|Housing||Steel sheet 1 mm, powder-laminated, light grey RAL 7035|
|Dimension||390 x 260 x100 mm|
|Cable entry||M25x1,5 for cable diameter from 6 – 20 mm|
|Distribution plates||4x 3 HU/7 PU, aluminium anodized for ST, SC, E2000, SC Duplex, LC Duplex|
|H02050A0302||Modular FO Wall Distributor SAM-SC||Housing with 2 swivel doors, separately lockable, each three cable entries on top/bottom for M25; with 8 SC cassettes|
|H02050A0303||Modular FO Wall Distributor SAM-SE||Housing with 2 swivel doors, separately lockable, each three cable entries on top/bottom for M25; with 4 SE cassettes|
|H02024A8100||front plate 3 HU/7 PU||6x SC, ST/SC|
|H02024A8101||front plate 3 HU/7 PU||6x SC Duplex; 6x ST/SC Duplex|
|H02024A8111||front plate 3 HU/7 PU||12x ST|
|H02024A8334||front plate 3 HU/7 PU||12x E2000|
|H02024A8105||front plate 3 HU/7 PU||6x LC Duplex|
|H02024A8125||front plate 3 HU/7 PU||12x LC Duplex|
dummy plate 3 HU/7 PU