Coax

TestLine

RF Components for
Production Line Testing / Lab Test and Measurement / Field Test and Measurement

TestLine: Termination Loads

Termination loads are connected as a load to an open signal output or an RF line in order to avoid reflection. They are available with an impedance of 50 Ohms. The performance spectrum of the termination loads varies between 1 W and 625 W up to maximum frequencies of 18 GHz. Termination loads are used for example on open ports on transmitters as well as in the calibration of RF test equipment.

Electrical Characteristics Series SMA / R-SMA
impedance 50 Ω
frequency range < 18 GHz (SMA)
< 6 GHz (R-SMA)
return loss 2 GHz: 34 dB
6 GHz: 23 dB
18 GHz: 17 dB
max. power 1 Watt
Electrical Characteristics Series N
impedance 50 Ω
frequency range < 18 GHz
return loss 4 GHz: 26 dB
6 GHz: 25 dB
18 GHz: 13 dB
max. power 2 res. 10 Watt
Electrical Characteristics Series 4.3-10
impedance 50 Ω
frequency range < 7,5 GHz
return loss

1,0 GHz: 40 dB
2,5 GHz: 35 dB
7,5 GHz: 21 dB

max. power 2 Watt
Electrical Characteristics Series TNC
impedance 50 Ω
frequency range < 6 GHz
return loss 6 GHz: 21 dB
max. power 1 Watt
Electrical Characteristics Series BNC
impedance 50 Ω
frequency range < 4 GHz
return loss 4 GHz: 24 dB
max. power 1  res. 2 Watt
Electrical Characteristics Series 7-16
impedance 50 Ω
frequency range < 7.5 GHz
return loss 2.5 GHz: 27 dB
max. power 2 res 10 Watt

TestLine Termination Loads in the Online Catalogue