DataVoice

MPO/MTP® Cabling System

High Performance Multifiber Push On Solution

Less installation time due to plug & play functionality

The Telegärtner MPO/MTP®-cabling system, due to its modularity, offers installers and operators reduced time & effort for installations, modification and maintenance of a structured communication cabling for today´s and future demands of data centers (acc. to EN50173-5:2007 and ISO/IEC 24764:2010).

The MPO/MTP® connector, specified and standardized in IEC 61754-7 and TIA/EIA 604-5, beside the LC fiber optic interface is the first choice for ITS (Information Telecommunication System) in tomorrow‘s bandwidth-hungry, high speed commercial buildings and data centers. It can be either used for parallel optics applications such as Infiniband with data rates up to 120 Gb/s and for the upcoming 40 Gb/s and 100 Gb/s Ethernet protocols via Multimode OM3, OM4 and OS2 fiber. Similar to the well-known MT-RJ connector, the MPO/MTP® houses several fibers in one single high-precision ferrule that can be PC or APC polished with a typical insertion loss of 0.25 dB, return loss of >60 dB for Singlemode and insertion loss of 0.2 dB, return loss >30 dB for Multimode.

Advantages at a Glance

Pre-connectorized assemblies

Pre-connectorized MPO/MTP® assemblies for reduced installation time with plug & play functionality.

Optimized air circulation

Ribbon cable MPO/MTP® Patch cords, FanOuts and Harness‘ with a reduced cable diameter consuming less space in cable ducts, conduits and path ways for optimized air circulation in raised-floors.

Fast Installation

Easy moves, adds and changes due to scalability and modularity of the product design for reduced down-times and faster installation.

Polarity A

In order to offer users the migration path from 10 Gbit/s to 40 Gbit/s the Telegärtner MPO/MTP® product family refers to polarity A.

High Performance and Quality

Factory-assembled with measurement report for high, enduring reliability and performance.