27. April 2015

DataVoice

Modular FO Distribution System

The requirements for optical wall distributors are becoming increasingly varied and demand­ing. Whether if fiber optics in office, industry, mobile radio or FTTH cablings -  the future demands more and more solutions for splicing. To meet this demand the product portfolio was expanded by a variety of modular components.

Modular Wall Distributor SAM

Modular Wall Distributor SAM

In the new wall distributors  you can splice up to 8x4 fibres on SC cassettes or 4x12 fibres on SE cassettes. The SAM fibre management enables fibre overlengths to be laid and the 250 μ fibres to be laid safely and protected to the cassettes. Fibre optic cables with a diameter of max. 20 mm can be fixed via three cable inlets each at the top and bottom with metric screw cable glands in the housing.

read more

Modular Wall Distributor

Modular Wall Distributor

The basic variant of the wall distributor allows splicing of up to 120 fibres. Fibre optic cables with a diameter of max. 20 mm can be fixed via four cable inlets at the top and bottom with metric screw cable glands in the housing. Using four 3 HU /7 TU front plates, it is possible to accommodate up to 48 FO simplex or duplex adaptors in the distributor.
The four separate front plates also enable mixed equipping with different adaptor types or for different fibre types.

read more

FO Distributor MPD24 for Surface Mounting

FO Distributor MPD24 for Surface Mounting

The MPD24 modular distributor is available in a third housing version for equipping with up to three 3 HU/7 PU front panels for FO adaptors of the types SC, LC, E2000 and ST.
Up to 72 fibres can be patched in the easy to install metal housing by the modular front plates. Mixed assembly of different adaptor types and different fibres is possible with the front plates.

read more

Modular Frontplates for 19

Modular Frontplates for 19" FO Patch Panels

With the modular front plate for 19” 1 HU FO patch panels, up to three 3 HU/7 TU front plates for ST, SC, LC and E2000 adaptors can be fitted. A maximum number of different connector faces can therefore be implemented on just one height unit. The special design enables the modular front plate to be fitted to different 19” 1 HU FO patch panels.

read more