Data centers are designed far more compact today than in the past. This becomes particularly clear when we look at the packing densities (number of ports/slots) in the active devices such as blades, servers etc. These packing densities must be transported in practice into a cabling infrastructure that also allows connections of devices to be disconnected or modified quickly and with a little risk as possible. New products such as cabinet systems and high-density cabling components must take heat and energy effort and their costs for the operator into consideration.
Especially for these requirements of data center operators, the Telegärtner portfolio contains products such as the 48-port/1 HU module distributor with the smart AMJ-S module or the Cross Connect Panel CCP32/1 HU among other things.
Individually assembled Hydra cables with copper connectors as well as the MPO/MTP®technology based on fibre optic conductors also ensure stable, secure communication. The multi-fibre FOC connectors with 12 or 24 fibres have been added to the latest edition of the EN 50173-2:2011-09 cabling standard.
40 GBase-T in copper cabling systems
The transmissions between active devices are already secure and established today by parallel, optical data streams up to 40 Gbit/s or even 100 Gbit/s. But it is still a very different story for the copper cabling solutions. Because of the dimensions of computer rooms according to the prEN 50600 series, lengths below 90 metres are often sufficient for parallel transmissions by copper pairs and connectors.
The demand to create solutions here is undisputed internationally and so the IEEE Committee (P 802.3bq) is examining demands for 40Gbit/s over 30 metres with shielded components under the name of NGBase-T (New Generation). The definitions made there are divided into connectors and cable specifications. Therefore the technical committee for connector hardware is already working on the definitions for requirements of category 8 up to 2,000 MHz.
The first cable designs are already available although these so far only cite values up to 1,600 MHz. Consideration of higher values has been postponed for the time being. Two solutions are proposed at present: a category 8.1 and possibly an additional category 8.2.
New in the history of standardisation
This could lead to a splitting within a category for the first time in the standardisation for application-neutral communication systems.
Variant 8.1 features the well-known connector face according to EN 60603-7-x and is downward compatible with the previously known and common connectors of Cat.6A. The product requirements are defined in EN 60603-7-81. The connector faces of category 8.2 include the current connector faces of Cat.7 and Cat7A with the required downward compatibility. The aim of the standardisation is to create international as well as regional definitions by 2015.
Telegärtner will position its own products on the market for the new applications and requirements. For the "here and now" and in order to keep up to date in real time, we recommend FOC and multi-fibre connectors for high-speed transmissions in data centers. These high-speed cabling systems can already be implemented today over a length of more than 30 metres.
Telegärtner technology therefore ensures that our smart phone displays do not stay blank.
Products in the Online Catalogue
19" Feedthrough panel incl. 48 AMJ Coupler K Cat.6A (4x12), 1 HU, RAL7035 grey
order number: J00029A0077
 Fig. may differ |  |    |
| product to shopping basket | page as PDF | zoom photo assembly instruction data sheet mounting dimensions product brochures tender text (english) STEP-File |
AMJ Module K Cat.6A T568B
| Technical Attributes | |
| Short name | AMJ Module K Cat.6A T568B |
| Remarks | tool-free connectivity, suitable for RJ45/11/12 plugs |
| Mount. dim. | Z121 |
| Accessories | ||
 | H06000A0056 | Mounting set for Mounting rail adaptor |
 | N00000A0013 | Plier wrench 1 3/8 inch |
 | N00000B0020 | Parallel pressing tool for AMJ/UMJ/STX modules; MFP8 |
 | H06000B0045 | Top-Hat Rail Adaptor TH 35 without modules/coupler |
| Accessory of | ||
 | J00020A0516 | module carrier AMJ single gang UP/50 alpine white; incl. 1 AMJ Module K Cat.6A T568A |
| | J00020A0517 | modul carrier AMJ single gang UP/50 alpine white; incl. 1 AMJ Module K Cat.6A T568B |
 | J00020A0518 | module carrier AMJ double gang UP/50 alpine white; incl. 2 AMJ Modules K Cat.6A T568A |
| | J00020A0519 | module carrier AMJ double gang UP/50 alpine white; incl. 2 AMJ Modules K Cat.6A T568B |
 | H02000A0071 | single gang surface mounting box 68x64, 1x AP compact, incl. shutter and marking window, without modules/adaptors |
 | H02000A0072 | Double gang surface mounting box 68x64, 2x AP compact, incl. shutter and marking window, without modules/adaptors |
 | H02000A0064 | Single gang surface mounting box 46x64, Single gang surface mounting box 46x64, 1x AP compact, without modules |
 | J02023K0025 | 19" Module Carrier 1 HU incl. 24xAMJ Coupler K Cat.5e |
 | J02024C0007 | 19" module Carrier with 48 AMJ coupler cat.6, 1HU, black |
| | J02023A0026 | 19" Module Carrier 1HU incl. 24xAMJ-K coupler Cat.6 |
| H02010A0075 | Single gang faceplate 86x86 white, unpopulated | |
| H02010A0076 | Double gang faceplate 86x86 white, unpopulated | |
 | H02010A0040 | face plate 80x80 mm, mating direction 45°, double gang, alpine white |
 | H02010A0068 | faceplate 25x50, single gang, w/o modules, 180°, with shutter and label field |
 | H02010A0069 | faceplate 25x50, single gang, w/o modules, 45°, with shutter and label field |
 | H02000A0090 | Single gang surface mounting box 80x80, AP, without modules, alpine white |
 | H02000A0103 | Mini Distributor MPD8 AMJ/UMJ TH35/AP alpine white, without modules |
 | H02000B0065 | Double gang surface mounting box 68x64, 2x AP compact, without modules |
 | H02000A0094 | Outlet IP44 AP with lock for 2x AMJ / UMJ Modules |
 | H02025A0260 | MPD24 AMJ/UMJ incl. cable strain relief, 24 Ports, pure white |
 | J02023K0027 | 19" Module Carrier 1 HU incl. 24xAMJ Module K Cat.6A T568A |
| | J02023A0033 | 19" Module Carrier 1 HU incl. 24xAMJ Module K Cat.6A, black |
| | J02023A0034 | 19" Module Carrier 1 HU incl. 24xAMJ Module K Cat.6A T568B |
| | J02023A0035 | 19" Module Carrier 1 HU incl. 24xAMJ Module K Cat.6A T568B, black |
 | H02025A0171 | 19" Frontplate 1,5 HU with cable strain relief |
| | H02025A0241 | 19" Frontplate 1,5 HU with cable strain relief, black |
 | H02025A0197 | 19" Frontplate 1 HU without cable strain relief |
| | H02025A0221 | 19" Frontplate 1 HE without cable relief, black |
 | H02025A0234 | 19" Frontplate Flex 1 HU incl. 24x snap-in-bezels for 24 AMJ-S / AMJ-Modules / Couplers, incl. grounding kit 0,3 m |
 | J02024A0007 | 19" Feedthrough panel incl. 48 AMJ Coupler K Cat.6A (4x12), 1 HU, RAL7035 grey |
 | H02025A0167 | 19" Frontplate 1 HU with cable strain relief |
 | H02025A0220 | 19" Frontplate 1 HU incl. grounding set, black |
 | H02000A0092 | Faceplate 80x80, projecting, double gang AP, alpine white |
| | H02010A0079 | face plate 50x50,single gang UP/50 cable duct/subfloor, without module/coupler, alpine white |
| | H02010A0081 | Double gang faceplate 50x50, 2x Up/50 BR/underfloor, without modules, alpine white |
 | H02010A0053 | Triple gang faceplate 80x80, 3x BR, without modules, alpine white |
 | H02010A0083 | Double gang faceplate 50x50, 2x UP/50 BR, w/o Modules for flush mounting |
 | H02000A0069 | data outlet IP44 incl. mounting plate for 1x AMJ resp. UMJ Module/Adaptor |
 | H02000A0070 | data outlet IP44 incl. mounting plate for 2x AMJ resp. UMJ Module/Adaptor |
19" Feedthrough panel incl. 48 AMJ Coupler K Cat.6A (4x12), 1 HU, RAL7035 grey
order number: J00029A0077
| Fig. may differ | | |
| product to shopping basket | page as PDF | zoom photo assembly instruction data sheet mounting dimensions product brochures tender text (english) STEP-File |
AMJ Module K Cat.6A T568B
| Technical Attributes | |
| Short name | AMJ Module K Cat.6A T568B |
| Remarks | tool-free connectivity, suitable for RJ45/11/12 plugs |
| Mount. dim. | Z121 |
| Accessories | ||
| | H06000A0056 | Mounting set for Mounting rail adaptor |
| | N00000A0013 | Plier wrench 1 3/8 inch |
| | N00000B0020 | Parallel pressing tool for AMJ/UMJ/STX modules; MFP8 |
| | H06000B0045 | Top-Hat Rail Adaptor TH 35 without modules/coupler |
| Accessory of | ||
| | J00020A0516 | module carrier AMJ single gang UP/50 alpine white; incl. 1 AMJ Module K Cat.6A T568A |
| | J00020A0517 | modul carrier AMJ single gang UP/50 alpine white; incl. 1 AMJ Module K Cat.6A T568B |
| | J00020A0518 | module carrier AMJ double gang UP/50 alpine white; incl. 2 AMJ Modules K Cat.6A T568A |
| | J00020A0519 | module carrier AMJ double gang UP/50 alpine white; incl. 2 AMJ Modules K Cat.6A T568B |
| | H02000A0071 | single gang surface mounting box 68x64, 1x AP compact, incl. shutter and marking window, without modules/adaptors |
| | H02000A0072 | Double gang surface mounting box 68x64, 2x AP compact, incl. shutter and marking window, without modules/adaptors |
| | H02000A0064 | Single gang surface mounting box 46x64, Single gang surface mounting box 46x64, 1x AP compact, without modules |
| | J02023K0025 | 19" Module Carrier 1 HU incl. 24xAMJ Coupler K Cat.5e |
| | J02024C0007 | 19" module Carrier with 48 AMJ coupler cat.6, 1HU, black |
| | J02023A0026 | 19" Module Carrier 1HU incl. 24xAMJ-K coupler Cat.6 |
| H02010A0075 | Single gang faceplate 86x86 white, unpopulated | |
| H02010A0076 | Double gang faceplate 86x86 white, unpopulated | |
| | H02010A0040 | face plate 80x80 mm, mating direction 45°, double gang, alpine white |
| | H02010A0068 | faceplate 25x50, single gang, w/o modules, 180°, with shutter and label field |
| | H02010A0069 | faceplate 25x50, single gang, w/o modules, 45°, with shutter and label field |
| | H02000A0090 | Single gang surface mounting box 80x80, AP, without modules, alpine white |
| | H02000A0103 | Mini Distributor MPD8 AMJ/UMJ TH35/AP alpine white, without modules |
| | H02000B0065 | Double gang surface mounting box 68x64, 2x AP compact, without modules |
| | H02000A0094 | Outlet IP44 AP with lock for 2x AMJ / UMJ Modules |
| | H02025A0260 | MPD24 AMJ/UMJ incl. cable strain relief, 24 Ports, pure white |
| | J02023K0027 | 19" Module Carrier 1 HU incl. 24xAMJ Module K Cat.6A T568A |
| | J02023A0033 | 19" Module Carrier 1 HU incl. 24xAMJ Module K Cat.6A, black |
| | J02023A0034 | 19" Module Carrier 1 HU incl. 24xAMJ Module K Cat.6A T568B |
| | J02023A0035 | 19" Module Carrier 1 HU incl. 24xAMJ Module K Cat.6A T568B, black |
| | H02025A0171 | 19" Frontplate 1,5 HU with cable strain relief |
| | H02025A0241 | 19" Frontplate 1,5 HU with cable strain relief, black |
| | H02025A0197 | 19" Frontplate 1 HU without cable strain relief |
| | H02025A0221 | 19" Frontplate 1 HE without cable relief, black |
| | H02025A0234 | 19" Frontplate Flex 1 HU incl. 24x snap-in-bezels for 24 AMJ-S / AMJ-Modules / Couplers, incl. grounding kit 0,3 m |
| | J02024A0007 | 19" Feedthrough panel incl. 48 AMJ Coupler K Cat.6A (4x12), 1 HU, RAL7035 grey |
| | H02025A0167 | 19" Frontplate 1 HU with cable strain relief |
| | H02025A0220 | 19" Frontplate 1 HU incl. grounding set, black |
| | H02000A0092 | Faceplate 80x80, projecting, double gang AP, alpine white |
| | H02010A0079 | face plate 50x50,single gang UP/50 cable duct/subfloor, without module/coupler, alpine white |
| | H02010A0081 | Double gang faceplate 50x50, 2x Up/50 BR/underfloor, without modules, alpine white |
| | H02010A0053 | Triple gang faceplate 80x80, 3x BR, without modules, alpine white |
| | H02010A0083 | Double gang faceplate 50x50, 2x UP/50 BR, w/o Modules for flush mounting |
| | H02000A0069 | data outlet IP44 incl. mounting plate for 1x AMJ resp. UMJ Module/Adaptor |
| | H02000A0070 | data outlet IP44 incl. mounting plate for 2x AMJ resp. UMJ Module/Adaptor |