These days, everyone wants to be constantly available and informed "just in time". Smart phones and other communication media make this possible. But everything has its price and a single Internet inquiry needs about 11-14 Wh of electrical power. This change in communication behaviour demands extensive technical adaptations to infrastructures.
Data centers are designed far more compact today than in the past. This becomes particularly clear when we look at the packing densities (number of ports/slots) in the active devices such as blades, servers etc. These packing densities must be transported in practice into a cabling infrastructure that also allows connections of devices to be disconnected or modified quickly and with a little risk as possible. New products such as cabinet systems and high-density cabling components must take heat and energy effort and their costs for the operator into consideration.
Especially for these requirements of data center operators, the Telegärtner portfolio contains products such as the 48-port/1 HU module distributor with the smart AMJ-S module or the Cross Connect Panel CCP32/1 HU among other things.
Individually assembled Hydra cables with copper connectors as well as the MPO/MTP®technology based on fibre optic conductors also ensure stable, secure communication. The multi-fibre FOC connectors with 12 or 24 fibres have been added to the latest edition of the EN 50173-2:2011-09 cabling standard.
40 GBase-T in copper cabling systems
The transmissions between active devices are already secure and established today by parallel, optical data streams up to 40 Gbit/s or even 100 Gbit/s. But it is still a very different story for the copper cabling solutions. Because of the dimensions of computer rooms according to the prEN 50600 series, lengths below 90 metres are often sufficient for parallel transmissions by copper pairs and connectors.
The demand to create solutions here is undisputed internationally and so the IEEE Committee (P 802.3bq) is examining demands for 40Gbit/s over 30 metres with shielded components under the name of NGBase-T (New Generation). The definitions made there are divided into connectors and cable specifications. Therefore the technical committee for connector hardware is already working on the definitions for requirements of category 8 up to 2,000 MHz.
The first cable designs are already available although these so far only cite values up to 1,600 MHz. Consideration of higher values has been postponed for the time being. Two solutions are proposed at present: a category 8.1 and possibly an additional category 8.2.
New in the history of standardisation
This could lead to a splitting within a category for the first time in the standardisation for application-neutral communication systems.
Variant 8.1 features the well-known connector face according to EN 60603-7-x and is downward compatible with the previously known and common connectors of Cat.6A. The product requirements are defined in EN 60603-7-81. The connector faces of category 8.2 include the current connector faces of Cat.7 and Cat7A with the required downward compatibility. The aim of the standardisation is to create international as well as regional definitions by 2015.
Telegärtner will position its own products on the market for the new applications and requirements. For the "here and now" and in order to keep up to date in real time, we recommend FOC and multi-fibre connectors for high-speed transmissions in data centers. These high-speed cabling systems can already be implemented today over a length of more than 30 metres.
Telegärtner technology therefore ensures that our smart phone displays do not stay blank.
Products in the Online Catalogue
19" Feedthrough panel incl. 48 AMJ Coupler K Cat.6A (4x12), 1 HU, RAL7035 grey
order number: J80023A0000
STX mounting rail outlet incl. RJ45 jack A Cat.6
A
| Technical Attributes |
| Short name | STX mounting rail outlet |
| Type | incl. RJ45 jack A Cat.6A T568A |
| Remarks | tool-free connectivity, suitable for RJ45/11/12 plugs, mounting rail TH35 |
| Colour | light grey |
Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.
Description of the Series/Product Category
For generic cabling in control cabinets, Telegärtner offers outlets and distributors which can be mounted directly next to one another on the mounting rail. They form the ideal connection between the arriving installation lines and the wiring inside the control cabinet. The components can be quickly and easily mounted on conventional TH 35 rails by simply clicking them in place.
Die STX Tragschienen-Verbinder mit STEADYTEC®-Technologie sind mit einer großen Auswahl von Einsätzen (RJ45, USB, LWL-Kupplungen) erhältlich. Mit Hilfe der frei wählbaren Einsätze, die sich problemlos in die Verbinder-Gehäuse einsetzen lassen, entsteht eine hohe Flexibilität sowohl in der Artikelauswahl als auch in den Anwendungsgebieten. Die Ausführungen für die vollgeschirmten RJ45 Module Cat.6A und RJ45 Kupplungen Cat.6 Class EA verfügen über eine im laufenden Betrieb schaltbare Potentialverbindung. Das ermöglicht eine einfache Fehleranalyse im Erdungskonzept sowie eine Trennung der Potenziale von Netzwerk und Schaltschrank.
Performance Characteristics
- Cat.6A acc. to IEC 60603-7-51
- Cat.6A re-embedded tested acc. to IEC 60512-27-100
- link certificate: Class EA acc. to ISO/IEC 11801
- 10 Gigabit-Ethernet compliant (IEEE 802.3an)
- overbending protection: ≥750 mating cycles with RJ45/RJ11/RJ12 plugs
- suitable for PoE+ acc. to IEEE 802.3at
- suitable for switching programs from several manufacturers with design capable faceplate AMJ-S Up/0 flex
- integrated strain relief for cable O.D. to 9 mm
- universal, world-wide available installation dimension for mounting cut-outs: 19.3 x 14.7 mm
- universal, world-wide available installation dimension for mounting cut-outs: 19.3 x 14.7 mm
- AMJ-S DD: with integrated protection against damage to the contacts by automatic disconnection of the plug connection
| Mechanical Characteristics |
| Core Diameter | 0,9 - 1,6 mm |
| Cu-Conductor diameter: solid | 0.41-0.64 mm AWG 26/1 - AWG 22/1 |
| Reusable IDC für AWG 23/1 - AWG 26/1 | ≤10 cycles |
| Reusable IDC for AWG 22/1 | ≤10 cycles |
| Reusable IDC for AWG 22/7 | ≤10 cycles |
| Reusable IDC for AWG 24/7 - AWG 26/7 | ≤10 cycles |
| Life (mating cycles RJ45, RJ12, RJ11) | ≥ 750 |
| Reusable IDC for AWG 22/1 and AWG 22/7 | ≤4 cycles |
| Reusable IDC for AWG 24/7 - 27/7 | ≤10 cycles |
| Cable diameter | max. 9 mm |
| Insertion force | ≤ 30 N |
| Cu-Conductor diameter: stranded | 0.46-0.76 mm AWG 27/7 - AWG 22/7 |
| Reusable contacts | ≤10 cycles |
| Material: housing / mounting rail | PA UL94 V0 grey |
| Material: housing | PA UL94 V0 grey |
| Material: earth contact spring | Spring steel 5-8 µm Sn on 3 µm Cu |
| Material: insulating housing | - |
| Material: jack housing | zinc diecast |
| Material: snap-fit | phosphor bronze tinned |
| Material: shield | German silver |
| Material: insulators | PC UL94 V0 |
| Material: contact spring | phosphor bronze tinned |
| Material: PCB | FR4 |
| Material: PCB finish | chem. tin-plated |
| Material: IDC termination finish | min. 3-6 µm Sn |
| Material: cable ties | PA ZK94 V2 |
| Material: contact spring finish | min. 0,8 µm (µin) Au on 1,2 µm (50µin) Ni |
| Material: cable clamp | PC UL94 V0 |
| Climatic Characteristics |
| UL | E244889 |
| Electrical Characteristics |
| PoE+ acc to IEEE 802.3at | fulfilled |
| PoE according to IEEE802.3af | Adequate for 4 Pair Power over Ethernet |
| Contact resistance | ≤ 20 mΩ |
| Insulation resistance | ≥ 500 MΩ |
| Voltage proof: contact-contact | ≥ 1000 V, DC |
| Voltage proof: contact-shield | ≥ 1500 V, DC |
| Current carrying capacity at 50°C | 1 A |
| Standards |
| Degrees of protection provided by enclosures (IP code) | IEC 60529 |
| Specification for low-voltage switchgear and controlgear | DIN EN 60947-1; DIN EN 60947-7-1 |
| Generic cabling systems | ISO/IEC 11801; EN 50173-1:2007; ISO/IEC 24702; IEC 61918 |
| Custom-designed cabling systems | PROFINET Installation Guideline |
| Connectors | IEC 60603-7-51 |
| Mounting rail TH35 | DIN 60715 |
|
| Ambient temperature | -40° C to +85° C |
|
| Category 6A (Component) | ISO/IEC 11801, DIN EN 50173-1 |
| Class EA (Channel) | ISO/IEC 11801, DIN EN 50173-1 |
| Class E (Channel with Coupler Cat.6) | - |
| Class D (Channel with Coupler Cat.5e) | - |
| Gigabit Ethernet acc. to IEEE 802.3 | fulfilled |
| 10 Gigabit Ethernet acc. to IEEE 802.3an | fulfilled |
| Category 6A | ISO/IEC 11801, DIN EN 50173-1 |
| Class EA (Permanent Link) | ISO/IEC 11801, DIN EN 50173-1 |
19" Feedthrough panel incl. 48 AMJ Coupler K Cat.6A (4x12), 1 HU, RAL7035 grey
order number: J80023A0000
STX mounting rail outlet incl. RJ45 jack A Cat.6
A
| Technical Attributes |
| Short name | STX mounting rail outlet |
| Type | incl. RJ45 jack A Cat.6A T568A |
| Remarks | tool-free connectivity, suitable for RJ45/11/12 plugs, mounting rail TH35 |
| Colour | light grey |
Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.
Description of the Series/Product Category
For generic cabling in control cabinets, Telegärtner offers outlets and distributors which can be mounted directly next to one another on the mounting rail. They form the ideal connection between the arriving installation lines and the wiring inside the control cabinet. The components can be quickly and easily mounted on conventional TH 35 rails by simply clicking them in place.
Die STX Tragschienen-Verbinder mit STEADYTEC®-Technologie sind mit einer großen Auswahl von Einsätzen (RJ45, USB, LWL-Kupplungen) erhältlich. Mit Hilfe der frei wählbaren Einsätze, die sich problemlos in die Verbinder-Gehäuse einsetzen lassen, entsteht eine hohe Flexibilität sowohl in der Artikelauswahl als auch in den Anwendungsgebieten. Die Ausführungen für die vollgeschirmten RJ45 Module Cat.6A und RJ45 Kupplungen Cat.6 Class EA verfügen über eine im laufenden Betrieb schaltbare Potentialverbindung. Das ermöglicht eine einfache Fehleranalyse im Erdungskonzept sowie eine Trennung der Potenziale von Netzwerk und Schaltschrank.
Performance Characteristics
- Cat.6A acc. to IEC 60603-7-51
- Cat.6A re-embedded tested acc. to IEC 60512-27-100
- link certificate: Class EA acc. to ISO/IEC 11801
- 10 Gigabit-Ethernet compliant (IEEE 802.3an)
- overbending protection: ≥750 mating cycles with RJ45/RJ11/RJ12 plugs
- suitable for PoE+ acc. to IEEE 802.3at
- suitable for switching programs from several manufacturers with design capable faceplate AMJ-S Up/0 flex
- integrated strain relief for cable O.D. to 9 mm
- universal, world-wide available installation dimension for mounting cut-outs: 19.3 x 14.7 mm
- universal, world-wide available installation dimension for mounting cut-outs: 19.3 x 14.7 mm
- AMJ-S DD: with integrated protection against damage to the contacts by automatic disconnection of the plug connection
| Mechanical Characteristics |
| Core Diameter | 0,9 - 1,6 mm |
| Cu-Conductor diameter: solid | 0.41-0.64 mm AWG 26/1 - AWG 22/1 |
| Reusable IDC für AWG 23/1 - AWG 26/1 | ≤10 cycles |
| Reusable IDC for AWG 22/1 | ≤10 cycles |
| Reusable IDC for AWG 22/7 | ≤10 cycles |
| Reusable IDC for AWG 24/7 - AWG 26/7 | ≤10 cycles |
| Life (mating cycles RJ45, RJ12, RJ11) | ≥ 750 |
| Reusable IDC for AWG 22/1 and AWG 22/7 | ≤4 cycles |
| Reusable IDC for AWG 24/7 - 27/7 | ≤10 cycles |
| Cable diameter | max. 9 mm |
| Insertion force | ≤ 30 N |
| Cu-Conductor diameter: stranded | 0.46-0.76 mm AWG 27/7 - AWG 22/7 |
| Reusable contacts | ≤10 cycles |
| Material: housing / mounting rail | PA UL94 V0 grey |
| Material: housing | PA UL94 V0 grey |
| Material: earth contact spring | Spring steel 5-8 µm Sn on 3 µm Cu |
| Material: insulating housing | - |
| Material: jack housing | zinc diecast |
| Material: snap-fit | phosphor bronze tinned |
| Material: shield | German silver |
| Material: insulators | PC UL94 V0 |
| Material: contact spring | phosphor bronze tinned |
| Material: PCB | FR4 |
| Material: PCB finish | chem. tin-plated |
| Material: IDC termination finish | min. 3-6 µm Sn |
| Material: cable ties | PA ZK94 V2 |
| Material: contact spring finish | min. 0,8 µm (µin) Au on 1,2 µm (50µin) Ni |
| Material: cable clamp | PC UL94 V0 |
| Climatic Characteristics |
| UL | E244889 |
| Electrical Characteristics |
| PoE+ acc to IEEE 802.3at | fulfilled |
| PoE according to IEEE802.3af | Adequate for 4 Pair Power over Ethernet |
| Contact resistance | ≤ 20 mΩ |
| Insulation resistance | ≥ 500 MΩ |
| Voltage proof: contact-contact | ≥ 1000 V, DC |
| Voltage proof: contact-shield | ≥ 1500 V, DC |
| Current carrying capacity at 50°C | 1 A |
| Standards |
| Degrees of protection provided by enclosures (IP code) | IEC 60529 |
| Specification for low-voltage switchgear and controlgear | DIN EN 60947-1; DIN EN 60947-7-1 |
| Generic cabling systems | ISO/IEC 11801; EN 50173-1:2007; ISO/IEC 24702; IEC 61918 |
| Custom-designed cabling systems | PROFINET Installation Guideline |
| Connectors | IEC 60603-7-51 |
| Mounting rail TH35 | DIN 60715 |
|
| Ambient temperature | -40° C to +85° C |
|
| Category 6A (Component) | ISO/IEC 11801, DIN EN 50173-1 |
| Class EA (Channel) | ISO/IEC 11801, DIN EN 50173-1 |
| Class E (Channel with Coupler Cat.6) | - |
| Class D (Channel with Coupler Cat.5e) | - |
| Gigabit Ethernet acc. to IEEE 802.3 | fulfilled |
| 10 Gigabit Ethernet acc. to IEEE 802.3an | fulfilled |
| Category 6A | ISO/IEC 11801, DIN EN 50173-1 |
| Class EA (Permanent Link) | ISO/IEC 11801, DIN EN 50173-1 |
