SMA Adaptor / Port Saver, 50 Ohm; (m-f)
SMA Adaptor / Port Saver, 50 Ohm; (m-f)
Technical attributes
Article name | SMA Adapt str m-f PortSav |
---|---|
Type | m-f |
Max. Frequency | 18 GHz |
Return Loss | 1 GHz: -40 dB; 3 GHz: -28 dB; 6 GHz: -25 dB, 18 GHz: -22 dB |
Remarks | brass gold plated |
Downloads
Description of the Series/Product Category
Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.
The SMA series is a very popular coax connector with threaded coupling, and can be used up to frequencies of over 18 GHz (depending on type). The impedance is controlled at 50 Ω. Connector styles are available for flexible, conformable and semi-rigid cable types. Versions of the SMA connector are available for mounting to printed circuit boards using both through-hole soldered and through-hole press-fit techniques, as well as surface mount types (SMD). Solder, crimp and clamp techniques are used to terminate this series to cables. SMA applications include communications, satellite and test equipment.
Mating face sealing for SMA connectors between plug and jack (mated) according to IP 68. This classification is a general statement for the relevant series. Individual connectors may deviate from the values shown. If in doubt, please consult our engineers.
Mechanical attributes
Durability (Matings) | ≥ 500 |
---|---|
Recommended coupling torque | 79 - 113 Ncm |
Material: spring contacts | CuBe2 |
Material: crimp ferrule | Cu |
Material: serrated lock washer | CuSn6 |
Material: insulators | PTFE |
Material: gaskets | MVQ |
Finish: Inner conductor | Cu1Ni2Au1.27 |
Finish outer conductor: Gold (standard; last digit ...1) | NiPAu |
Finish outer conductor: MIL gold (last digit ...2) | Cu1Ni2Au1.27 |
Finish outer conductor: Stainless Steel (last digit ...6) | passivated |
Finish outer conductor: Type for printed circuits (last digit ...7) | SnPb8 |
Finish outer conductor: Telealloy (white bronze) (last digit ...8) | CuSnZn3 (Telealloy); Ag2CuSnZn0.5 (Optargen) |
Finish outer conductor: Nickel (last digit ...9) | Cu2Ni5 |
Finish other metal parts: Gold (standard; last digit ...1) | Cu2Ni5Au0.2 |
Finish other metal parts: MIL gold (last digit ...2) | Cu1Ni2Au0.8 |
Finish other metal parts: Stainless steel (MIL type; last digit ...6) | passivated |
Finish other metal parts: Telealloy (white bronze) (last digit ...8) | CuSnZn3 |
Finish other metal parts: Nickel (last digit ...9) | Cu2Ni5 |
Thermal and climatic attributes
Climatic category acc. to IEC 60068 - 1 | 55/155/56 |
---|
Elecrical attributes
Impedance | 50 Ω |
---|---|
Voltage proof | 1 kV/50 Hz |
Working voltage | ≤ 335 V/50 Hz |
Contact resistance inner conductor | ≤ 3 mΩ |
Contact resistance outer conductor | ≤ 2 mΩ |
Insulation resistance | ≥ 5 GΩ |
Frequency range for flexible cable up to | 12,4 GHz |
Frequency range for semi-rigid cable up to (Straight style) | 18 GHz |
Frequency range for semi-rigid cable up to (Angle style) | 12,4 GHz |
Return loss flexible cable (straight and angle style) at 1 GHz | ≥ 20,00 dB |
Return loss flexible cable (straight and angle style) at 2 GHz | ≥ 19,20 dB |
Return loss flexible cable (straight and angle style) at 4 GHz | ≥ 17,70 dB |
Return loss flexible cable (straight and angle style) at 6 GHz | ≥ 16,50 dB |
Return loss semi-rigid cable (straight style) at 1 GHz | ≥ 28,50 dB |
Return loss semi-rigid cable (straight style) at 2 GHz | ≥ 27,50 dB |
Return loss semi-rigid cable (straight style) at 4 GHz | ≥ 26,00 dB |
Return loss semi-rigid cable (straight style) at 6 GHz | ≥ 24,90 dB |
Return loss semi-rigid cable (angle style) at 1 GHz | ≥ 25,70 dB |
Return loss semi-rigid cable (angle style) at 2 GHz | ≥ 25,20 dB |
Return loss semi-rigid cable (angle style) at 4 GHz | ≥ 24,20 dB |
Return loss semi-rigid cable (angle style) at 6 GHz | ≥ 23,20 dB |
Norms
Standards | IEC 60 169-15 |
---|