SMP Angle Cable Jack Crimp G7 (RG-316/U), solder/crimp
SMP Angle Cable Jack Crimp G7 (RG-316/U), solder/crimp
Technical attributes
| Article name | SMP Jck 90 sd/cr G7 |
|---|---|
| Cable group; cable | G7 (RG-316/U) RG-316/U |
| Remarks | solder/crimp |
| Max. Frequency | 6 GHz |
| Assembly | C5116 |
Downloads
Description of the Series/Product Category
Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.
The SMP series comprises micro-miniature RF connectors with a snap coupling mechanism, suitable for use up to 12 GHz. The impedance is controlled at 50 Ohm. The mating faces are designed in accordance with the MIL-STD-348A specification. Cable terminations are either crimp or solder designs, for flexible and semi-rigid cables. The SMP series connectors are primarily used in high-speed signal transmission lines. Board-to-board PCB connections can be realised using the so-called SMP "bullets".
There are three different coupling mechanisms: Smooth bore Limited detent Full detent
Mechanical attributes
| Durability (mating cycles) Full Detent | ≥ 100 |
|---|---|
| Durability (mating cycles) Limited Detent | ≥ 500 |
| Durability (mating cycles) Smooth Bore | ≥ 1000 |
| Insertion force Full Detent | ≤ 68 N |
| Insertion force Limited Detent | ≤ 45 N |
| Insertion force Smooth Bore | ≤ 9 N |
| Withdrawal force Full Detent | min. 22 N |
| Withdrawal force Limited Detent | min. 9 N |
| Withdrawal force Smooth Bore | min. 2,2 N |
| Material: spring contacts | CuBe2 |
| Material: solid contact parts | CuZn39Pb3 |
| Material: crimp ferrule | Cu |
| Material: insulators | PTFE, LCP, PEEK |
| Finish: Inner conductor | NiP-Au |
| Finish: Outer conductor | NiP-Au |
| Finish: Other metal parts | Ni-Au |
Thermal and climatic attributes
| Climatic category acc. to IEC 60068 - 1 | 55/155/21 |
|---|
Elecrical attributes
| Contact resistance inner conductor | ≤ 6 mΩ |
|---|---|
| Contact resistance outer conductor | ≤ 2 mΩ |
| Insulation resistance | ≥ 5 GΩ |
| Impedance | 50 Ω |
| Frequency range up to | 12 GHz |
| VSWR: Straight style, semi-rigid | typ. 1.03+0.02 f (GHz) |
| VSWR: Angle style, semi-rigid | typ. 1.04+0.03 f (GHz) |
| Proof voltage | 500 Veff/50 Hz |
| Working voltage | ≤ 335 Veff/50 Hz |
