SMP Straight Jack G11 (UT-85); solder/solder
SMP Straight Jack G11 (UT-85); solder/solder
Technical attributes
Article name | SMP Jck str sd/sd G11 |
---|---|
Cable group; cable | G11 (UT-85) 1671A |
Remarks | solder/solder |
Assembly | C49 |
Return Loss | typ.: 4 GHz: -30 dB; 12 GHz: -23 dB; 18 GHz: -20 dB |
Downloads
Description of the Series/Product Category
Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.
The SMP series comprises micro-miniature RF connectors with a snap coupling mechanism, suitable for use up to 12 GHz. The impedance is controlled at 50 Ohm. The mating faces are designed in accordance with the MIL-STD-348A specification. Cable terminations are either crimp or solder designs, for flexible and semi-rigid cables. The SMP series connectors are primarily used in high-speed signal transmission lines. Board-to-board PCB connections can be realised using the so-called SMP "bullets".
There are three different coupling mechanisms: Smooth bore Limited detent Full detent
Mechanical attributes
Durability (mating cycles) Full Detent | ≥ 100 |
---|---|
Durability (mating cycles) Limited Detent | ≥ 500 |
Durability (mating cycles) Smooth Bore | ≥ 1000 |
Insertion force Full Detent | ≤ 68 N |
Insertion force Limited Detent | ≤ 45 N |
Insertion force Smooth Bore | ≤ 9 N |
Withdrawal force Full Detent | min. 22 N |
Withdrawal force Limited Detent | min. 9 N |
Withdrawal force Smooth Bore | min. 2,2 N |
Material: spring contacts | CuBe2 |
Material: solid contact parts | CuZn39Pb3 |
Material: crimp ferrule | Cu |
Material: insulators | PTFE, LCP, PEEK |
Finish: Inner conductor | NiP-Au |
Finish: Outer conductor | NiP-Au |
Finish: Other metal parts | Ni-Au |
Thermal and climatic attributes
Climatic category acc. to IEC 60068 - 1 | 55/155/21 |
---|
Elecrical attributes
Contact resistance inner conductor | ≤ 6 mΩ |
---|---|
Contact resistance outer conductor | ≤ 2 mΩ |
Insulation resistance | ≥ 5 GΩ |
Impedance | 50 Ω |
Frequency range up to | 12 GHz |
VSWR: Straight style, semi-rigid | typ. 1.03+0.02 f (GHz) |
VSWR: Angle style, semi-rigid | typ. 1.04+0.03 f (GHz) |
Proof voltage | 500 Veff/50 Hz |
Working voltage | ≤ 335 Veff/50 Hz |