AMJ Module Cat.8.1 T568A/B
AMJ Module Cat.8.1 T568A/B
Technical attributes
| Article name | CU-CN AMJ mo C8.1 s T568A/B |
|---|---|
| Remarks | RJ45 module featuring full-metal cable clamp |
Description of the Series/Product Category
Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.
The all new field-assembly keystone jack AMJ Module Cat.8.1 T568A/B acc. to IEC series 60603-7 (RJ45 8P8C) features a robust zinc die cast housing with 360° shielding for secure data transmission regardless of outside electrical interference. Its slim and at the same time extremely short housing with keystone mounting dimensions allows easy installation in all kinds of applications. Solid conductor cables can be easily terminated in the field with is IDCs suitable for AWG23/1 - 22/1 with no special tools. The AMJ Module Cat.8.1 comes with a multi-level strain relief and shield connection for easy adaptation to various cable outer diameter. Equipotential bonding is child´s play with the use of preassembled bonding cables using flat connection 2.8 mm. An integrated protective cap is part of scope of delivery, too.
Performance characteristics
Category 8.1/Class I acc. ISO/IEC 11801-1
Connector acc. IEC 60603-7 series RJ45 8P8C
25/40GBase-T acc. IEEE 802.3bq
backward compatible to Class EA acc.
backward compatible to Class EA acc. ISO/IEC 11801-1 (Permanent link up to 90 m and Channel up to 100 m)
Life: ≥ 750 mating cycles
Shielding housing material: die-cast nickel-plated zinc
Outer diameter: 6 - 10 mm
Temperature range: -40°C to 70°C
Power over Ethernet plus (PoE+) acc. IEEE 802.3at
Cu conductor diameter: solid 0,54 – 0,64 mm (AWG23 – 22/1) core diameter: 1,0 – 1,6 mm
IP20
Mechanical attributes
| Insertion force | ≤ 30 N |
|---|---|
| Material: housing | zinc diecast |
| Life (mating cycles RJ45, RJ12, RJ11) | ≥ 750 |
| Cu-Conductor diameter: solid | 0,54 - 0,64 mm AWG23/1 - AWG22/1 |
| Material: shield | copper alloy |
| Material: insulators | PBT UL94 HB natur |
| Core Diameter | 1,0 - 1,6 mm |
| Material: PCB | FR4 |
| Reusable IDC for AWG 22/1 | ≤4 cycles |
| Reusable IDC for AWG 22/1 and AWG 22/7 | ≤4 cycles |
| Reusable IDC für AWG 23/1 - AWG 26/1 | ≤10 cycles |
| Material: contact spring | phosphor bronze tinned |
| Material: contact IDC termination | CuNi2Si, Sn plated |
| Cable diameter | 6,0 - 10,0 mm |
| Material: IDC termination finish | min. 3-6 µm (120-240 µin) Sn |
Elecrical attributes
| Contact resistance | ≤ 20 mΩ |
|---|---|
| Insulation resistance | ≥ 500 MΩ |
| Voltage proof: contact-contact | ≥ 1000 V, DC |
| Voltage proof: contact-shield | ≥ 1500 V, DC |
| Current carrying capacity at 50°C | 1 A |
| PoE+ acc to IEEE 802.3at | Adequate for Power over Ethernet+ |
Transmission properties
| Category 8.1 (Component) | ISO/IEC 11801, DIN EN 50173-1 |
|---|---|
| Class I (Permanent Link) | ISO/IEC 11801, DIN EN 50173-1 |
| Class I (Channel) | ISO/IEC 11801, DIN EN 50173-1 |
| Class E (Channel with Coupler Cat.6) | - |
| Class D (Channel with Coupler Cat.5e) | - |
| Gigabit Ethernet acc. to IEEE 802.3 | fulfilled |
| 10 Gigabit Ethernet acc. to IEEE 802.3an | fulfilled |
| 25/40 Gigabit Ethernet acc. to IEEE 802.3bq | fulfilled |
Norms
| Connectors | IEC 60603-7-51 |
|---|
Environmental requirements
| Ambient temperature | -40° C to +85° C |
|---|
