Online-Catalogue DataVoice Office

Item number : 100022940

(Old item number J00020A0389)


Outlet AMJ45 8/8 Up/50 Cat.5e alpine white

Technical attributes

Short name

AMJ45 8/8 Up/50 Cat.5e

Type

cable duct mounting, 2xRJ45

Colour

alpine white

Description of the Series/Product Category

Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.


Performance characteristics

Transmission performance: Cat.6A acc. to ISO/IEC 11801; EN 50173-1
fully shielded
360° shielding contact and strain relief by means of two (one in the case of Cat.5e) separate, captive screw clamps for the exterior cable jacket and shielding
can be wired up from all directions, in 8x45° steps
either horizontal or vertical installation in the cable duct as a result of variable cable inlet
Type offers low installation depth; problem-free installation in floor tanks as a result of cable inlet from the side within the subfloor mounting box
option of plug-in ground connection at all four corners; according to DIN 46342-1; 6.3 mm
can be combined with covers of a wide variety of switching programs
Independent AP design available, an AP add-on set is not required
faceplate can be retrofitted with a flip-up loss-proof, transparent label field
protection flaps
1-way (8) and 2-way outlets (8/8, 2x8(4)) available
stable, compact, ergonomic construction, that provides secure hold during installation

Mechanical attributes

Insertion force ≤ 30 N
Life (mating cycles RJ45, RJ12, RJ11) ≥ 750
Conductor diameter solid 0.41 - 0.64 mm AWG 26/1 - AWG 22/1
Core Diameter 0,7 - 1,6 mm
Material: housing zinc diecast
Material: insulators PA, PBT, ABS, PC
Material: PCB FR4 UL94 V0
Material: PCB finish tin plated
Material: contact spring CuSn, spring steel
Material: contact spring finish min. 0,8 µm Au on 1,2 µm Ni
Material: contact IDC termination CuZn
Material: IDC termination finish tin plated

Elecrical attributes

Contact resistance ≤ 20 mΩ
Insulation resistance ≥ 500 MΩ
Voltage proof: contact-contact ≥ 1000 V, DC
Voltage proof: contact-shield ≥ 1500 V, DC
PoE+ acc to IEEE 802.3at Cat.6A, Class EA 500
PoE according to IEEE802.3af Cat.5e
PoE according to IEEE802.3af Adequate for 4 Pair Power over Ethernet
Current carrying capacity at 50°C 1 A

Transmission properties

Category 6^A (Component) for products Cat.6^A ISO/IEC 11801, DIN EN 50173-1
Class E^A (Permanent Link) for products Cat.6^A, Class E^A 500 ISO/IEC 11801, DIN EN 50173-1
Class E^A (Channel) for products Cat.6^A, Class E^A 500 ISO/IEC 11801, DIN EN 50173-1
Category 5e ISO/IEC 11801, DIN EN 50173-1
Gigabit Ethernet acc. to IEEE 802.3 for Cat.5e
10 Gigabit Ethernet acc. to IEEE 802.3an for Cat.6A, Class EA 500

Norms

Connectors IEC 60603-7-51 / -7-3

Environmental requirements

Ambient temperature -40° C to + 70° C

Acessories

Universal Equpiment Mounting Set for Outlets without half shell}
Universal Equpiment Mounting Set for Outlets without half shell
Top hat rail adaptor for surface mounting set }
Top hat rail adaptor for surface mounting set
Surface mount set alpine white}
Surface mount set alpine white
protection cap for RJ45, RAL 1013 alpine white}
protection cap for RJ45, RAL 1013 alpine white
protection cap red for RJ45}
protection cap red for RJ45
protection cap green for RJ45}
protection cap green for RJ45
protection cap blue for RJ45}
protection cap blue for RJ45
protection cap for RJ45 RAL 9005 black}
protection cap for RJ45 RAL 9005 black
Tool for IDC termination (LSA Plus) without wire cutter}
Tool for IDC termination (LSA Plus) without wire cutter
LSA Plus Tool }
LSA Plus Tool
cover frame single 81x81 alpine white}
cover frame single 81x81 alpine white
Universal Equpiment Mounting Set for Outlets with 1 half shell}
Universal Equpiment Mounting Set for Outlets with 1 half shell

Acessories