Less fuss. More flexibility.

Here’s the situation: An existing network needs extending. A cable link needs to be repaired or replaced. A peripheral device needs to be connected quickly. Your customer expects a fast and reliable solution but you don’t have a cable assembly ready at hand. Sound familiar? Now you can keep your cool when faced with such demands – with the new, field assembly UFP8 Cat.6A plug developed by Telegärtner.

The UFP8 Cat.6A is the RJ45 plug for time-saving and efficient on-site assembly for all networks, from Voice right through to 10 Gigabit Ethernet. It can be assembled on all standard types of cable in just 60 seconds – and no special tools are required. Whether in the office, in data centers or in home networks – the UFP8 Cat.6A offers unprecedented flexibility and saves time and money on installation, repairs and maintenance.

Performance characteristics

 

Long release latch
Insertion and withdrawal made easy in confined spaces

Pre-assembled protection cap
Effective protection of contacts from dirt and damage in transit

Standardised plug interface
Conforming to IEC 60603-7-41

Piercing contacts
Suitable for conductor cross-sections AWG27/7 – 22/7, AWG 24/1 – 22/1

4-Kammern-Adernmanager 
Erhältlich mit Farbcode T568A oder T568B

Four-chamber wire manager
Available with colour code T568A or T568B

Cat.6A 
acc. ISO/IEC 11801:2010

Telegärtner UFP8 Cat.6A

All information and article numbers can be found in our brochure.

Brochure

Fast and safe installation in three steps:

Step 1: Connect cable

Remove cable jacket and prepare wires by untwisting pairs and inserting them into wire manager. The wire manager is available in colour code T568A or T568B. Press wire manager together with a plier wrench and cut off excess wires.

 

Step 2: Insert in plug housing

Remove black assembling aid and insert board with wires connected into plug housing. The wire manager is keyed and can only be inserted the right way up.

 

Step 3: Close plug

Press housing until snap-in and attach strain relief acc. to cable diameter.

 

Assembly instructions

Here you get an assembly instruction.

PDF-Download

Technical properties

 

Category 6A
ISO/IEC 11801:2010;
ANSI/TIA/EIA-568-C.2

Connector
IEC 60603-7-41

Lifetime
≥ 750 mating cycles

Contact finish material
Ni1.2Au0.8

Housing material
PC UL94-V0 black

High Power over Ethernet plus (PoE+)
acc. with IEEE 802.3at

Temperature range
-40°C bis 70°C

 

Cu conductor diameter (J00026A3000, -1, -3110, -3111):
solid 0.51 – 0.57 mm (AWG 24/1 – 23/1) or
stranded 0.46 – 0.65 mm (AWG 27/7 – 23/7)
core diameter: 0.85 – 1.1 mm

Cu conductor diameter (J00026A3002, -3, -3112, -3113):
solid 0.57 – 0.64 mm (AWG 23/1 – 22/1) or
stranded 0.65 – 0.76 mm (AWG 23/7 – 22/7)
core diameter: 1.1 – 1.6 mm

Outer diameter of cable
5.5 – 8.5 mm

Reusable piercing contacts
≤ 4 cycles