TNC to N m-f
TNC to N m-f
Technical attributes
Article name | Adapt str TNCm - Nf |
---|---|
Type | TNC (m) / N (f) |
Max. Frequency | 6 GHz |
Return Loss | typ.: 1 GHz: -31 dB; 3 GHz: -28 dB; 6 GHz: -23 dB |
Life | ≥ 500 |
Downloads
Description of the Series/Product Category
Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.
The TNC series is a commonly used coax connector. The same size as BNC connectors, but with a threaded coupling mechanism, this connector can be used up to 11 GHz. Both 50 Ω and 75 Ω impedances are available. Connector styles are available for flexible, conformable and semi-rigid cable types. Versions of the TNC connector are available for mounting to printed circuit boards using both through-hole soldered and through-hole press-fit techniques. Both crimp and clamp cable termination processes are used for this series. Applications for these connectors range from signal and data to video transmission where vibration resistance is required. TNC’s are a low-cost high-frequency solution for coax connections.
Mating face sealing for TNC connectors between plug and jack (mated) according to IP 68. The classifications are general statements for the relevant series. Individual connectors may deviate from the values shown. If in doubt, please consult our engineers.
Mechanical attributes
Recommended coupling torque | 0.46 - 0.69 Nm |
---|---|
Durability (Matings) | ≥ 500 |
Material: spring contacts | CuBe2; CuNi1Pb1(C97) |
Material: outer conductor | CuZn39Pb3 |
Material: other metal parts | CuZn39Pb3 |
Material: insulators | PTFE/PE |
Material: gaskets | Silicone |
Finish: Inner conductor | Cu1Ni2Au0.8 |
Finish: Outer conductor | Cu2Ni5 |
Finish: Other metal parts | Cu2Ni5 |
Thermal and climatic attributes
Types with PTFE insulator | 40/155/21 |
---|---|
Types with PE insulator | 40/75/21 |
Elecrical attributes
Contact resistance inner conductor | ≤ 10 mΩ |
---|---|
Contact resistance outer conductor | ≤ 2,5 mΩ |
Insulation resistance | ≥ 5 GΩ |
Voltage proof | 1.5 kVeff/50 Hz |
Impedance | 50 Ω/(75 Ω) |
Return loss: Straight style (valid for 50 Ω only) | ≥ 16.5 dB/11 GHz |
Working voltage | ≤ 500 Veff/50 Hz |
Frequency range up to | 11 GHz |
Norms
Standards | IEC 60 169-17 |
---|
Note :
Combination connectors and cable clamps can be utilised to create a further number of TNC connector variations.