Outlet UMJ45 8/8 Up Cat.5e pearl white RAL 1013
Outlet UMJ45 8/8 Up Cat.5e pearl white RAL 1013
Technical attributes
Article name | CU-Out UMJ45 8/8 Up C5 flush plwt |
---|---|
Type | flush mounting, 2xRJ45 |
Colour | pearl white RAL 1013 |
Downloads
Description of the Series/Product Category
Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.
Performance characteristics
unshilded
stable, compact, ergonomic construction, that provides secure hold during installation
1-way (8) and 2-way outlets (8/8, 2x8(4)) available
can be combined with covers of a wide variety of switching programs
Independent AP design available, an AP add-on set is not required
conventional cable ties that are part of the standard delivery provide strain relief for cables
flush mounting type: cable infeed through centric cable strain relief from eight directions in 45° increments
surface mounting type: cable infeed from four directions in 90° increments
can be installed either horizontally or vertically in the cable duct using a four-hole bearer ring and freely selectable cable infeed
1-way (8) and 2-way outlets (8/8, 2x8(4)) available
types with low installation depth (29 mm); can be installed in floor tank without problems
can be combined with covers of a wide variety of switching programs
Independent AP design available, an AP add-on set is not required
protection flaps can be retrofitted; on request, can be delivered already integrated to the customer's specifications
Cover plate can be retrofitted with a flip-up loss-proof, transparent label field, or can be delivered preinstalled according to the customer's specifications
Mechanical attributes
Insertion force | ≤ 20 N |
---|---|
Life (mating cycles RJ45, RJ12, RJ11) | ≥ 750 |
Conductor diameter | solid 0,40 - 0,65 mm AWG 26/1 - AWG 22/1 |
Core Diameter | 0,7 - 1,6 mm |
Material: insulators | PBT, ABS |
Material: housing | PA |
Material: PCB | FR4 |
Material: PCB finish | tin plated |
Material: contact spring finish | min. 0,8 µm Au on 1,2 µm Ni |
Material: contact spring | CuSn, spring steel |
Material: contact IDC termination | CuZn |
Material: IDC termination finish | tin plated |
Material: housing UMJ45 | PA |
Material: insulators | PBT, ABS |
Elecrical attributes
Contact resistance | ≤ 20 mΩ |
---|---|
Insulation resistance | ≥ 500 mΩ |
Voltage proof: contact-contact | ≥ 1000 V, DC |
Voltage proof: contact-shield | ≥ 1500 V, DC |
Current carrying capacity at 50°C | 1 A |
PoE+ acc to IEEE 802.3at | Cat.6A |
PoE according to IEEE802.3af | Cat.5e |
PoE according to IEEE802.3af | Adequate for 4 Pair Power over Ethernet |
Transmission properties
Category 6^A (Component) for products Cat.6^A | ISO/IEC 11801, DIN EN 50173-1 |
---|---|
Class E^A (Permanent Link) for products Cat.6^A, Class E^A 500 | ISO/IEC 11801, DIN EN 50173-1 |
Class E^A (Channel) for products Cat.6^A, Class E^A 500 | ISO/IEC 11801, DIN EN 50173-1 |
Category 5e | ISO/IEC 11801, EN 50173-1 |
Gigabit Ethernet acc. to IEEE 802.3 | Adequate for Gigabit Ethernet |
10 Gigabit Ethernet acc. to IEEE 802.3an | for Cat.6A |
Cat.6A | PL acc. to ANSI/TIA/EIA-568-B.2-10 |
Class EA | ISO/IEC 11801:2002 FPDAM2:2009; ISO/IEC 11801:2002+A1:2008 |
Cat.6 | ISO/IEC 11801, EN 50173-1 |
Class E | ISO/IEC 11801, EN 50173-1 |
Channel Class E | ISO/IEC 11801, EN 50173-1 |
Norms
Connectors | IEC 60603-7-4 / -7-2 |
---|
Environmental requirements
Ambient temperature | -40° C to + 70° C |
---|