BNC T Adaptor f-m-f

BNC T Adaptor
Item number: 100023596(Old item number J01004C0616)

BNC T Adaptor f-m-f

Technical attributes

Article name

BNC T-Adapt f-m-f Z50


50 Ω





Description of the Series/Product Category

Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.

The BNC series is the most commonly used coax connector. With its bayonet coupling mechanism this connector can be used up to 4 GHz. Both 50 and 75 Ω impedances are available. Connector styles are available for flexible, conformable and semi-rigid cable types. Versions of the BNC connector are available for mounting to printed circuit boards using both through-hole soldered and through-hole press-fit techniques. Both crimp and clamp cable termination processes are used for this series. BNC connectors are used for signal, data and video transmission applications.
Mating face sealing for BNC connectors between plug and jack (mated) according to IP 54. The classifications are general statements for the relevant series. Individual connectors may deviate from the values shown. If in doubt, please consult our engineers.

Mechanical attributes

Durability (Matings) ≥ 500
Finish: Inner conductor Cu1Ni2Au0.8
Material: spring contacts CuBe2; CuPb1.15Ni1
Material: outer conductor CuZn39Pb3
Finish: Outer conductor Cu2Ni5 (Nickel); Ag2CuSnZn0.5 (Optargen)
Material: other metal parts CuZn39Pb3
Finish: Other metal parts Cu2Ni5
Material: insulators PTFE; PE
Material: gaskets Silicone

Thermal and climatic attributes

Types with PTFE insulator 40/155/21
Types with PE insulator 40/75/21

Elecrical attributes

Contact resistance inner conductor ≤ 20 mΩ
Contact resistance outer conductor ≤ 5 mΩ
Insulation resistance ≥ 5 GΩ
Voltage proof 1.5 kVeff/50 Hz
Impedance 50 Ω/(75 Ω)
Return loss: Straight style ≥ 20 dB/3 GHz (50 Ω types)
Return loss: Angle style ≥ 17.7 dB / 3 GHz (50 Ω types)
Working voltage ≤ 500 Veff/50 Hz
Frequency range up to 4 GHz


Standards IEC 61 169-8
Note :

Combination connectors and cable clamps can be utilised to create a further number of BNC connector variations.