design capable module carrier AMJ-S flex incl. 1 AMJ-S Module Cat.6A T568A
design capable module carrier AMJ-S flex incl. 1 AMJ-S Module Cat.6A T568A
Technical attributes
Article name | CU-MC AMJ-S C6A UP/0 1x T568A flex |
---|---|
Type | module carrier incl. 1 AMJ-S Module Cat.6A T568A, suitable for switching programs of several manufacturers* |
Remarks | for cable duct and underfloor, for flush-mounting installation special electronics boxes are required; mating direction 45° |
Series | AMJ-S |
Description of the Series/Product Category
Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.
Performance characteristics
Cat.6A gemäß IEC 60603-7-51, Cat.6A re-embedded getestet gemäß IEC 60512-27-100
Linkzertifizierung: Klasse EA gemäß ISO/IEC 11801
10 Gigabit-Ethernet konform (IEEE 802.3an)
Kontakt-Überbiegeschutz: ≥750 Steckzyklen mit RJ45/RJ11/RJ12-Steckern
geeignet für PoE+ gemäß IEEE 802.3at
mit designfähiger Modul-Aufnahme AMJ-S Up/0 flex
kombinierbar mit Abdeckungen diverser Schalterprogramm-Hersteller
integrierte Kabelabfangung für Kabeldurchmesser bis 9 mm
Universelles weltweit verfügbares Einbaumaß für Montageausschnitte 19,3 x 14,7 mm
Optisch überwachte Prüfung der RJ45-Kontakthöhen
Einbau Unterputz möglich
Bestückt mit bis zu drei AMJ-S Modulen
Mechanical attributes
Insertion force | ≤ 30 N |
---|---|
Life (mating cycles RJ45, RJ12, RJ11) | ≥ 750 |
Cu-Conductor diameter: solid | 0.41 - 0.64 mm AWG 26/1 - AWG 22/1 |
Cu-Conductor diameter: stranded | 0.46 - 0.76 mm AWG 27/7 - AWG 22/7 |
Core Diameter | 0,9 - 1,6 mm |
Reusable IDC for AWG 22/1 and AWG 22/7 | ≤4 cycles |
Reusable IDC für AWG 23/1 - AWG 26/1 | ≤10 cycles |
Reusable IDC for AWG 24/7 - 27/7 | ≤10 cycles |
Cable diameter | max. 9 mm |
Material: housing | zinc diecast |
Material: insulating housing | - |
Material: snap-fit | phosphor bronze tinned |
Material: shield | German silver |
Material: insulators | PC UL94 V0 |
Material: PCB | FR4 |
Material: PCB finish | chem. tin-plated |
Material: contact spring | phosphor bronze tinned |
Material: contact spring finish | min. 0,8 µm (µin) Au on 1,2 µm (50µin) Ni |
Material: contact IDC termination | CuNi2Si |
Material: IDC termination finish | min. 3-6 µm (120-240 µin) Sn |
Material: cable clamp | PC UL94 V0 |
Thermal and climatic attributes
UL | E244889 |
---|
Elecrical attributes
Contact resistance | ≤ 20 mΩ |
---|---|
Insulation resistance | ≥ 500 MΩ |
Voltage proof: contact-contact | ≥ 1000 V, DC |
Voltage proof: contact-shield | ≥ 1500 V, DC |
Current carrying capacity at 50°C | 1 A |
PoE+ acc to IEEE 802.3at | Adequate for Power over Ethernet+ |
PoE according to IEEE802.3af | Adequate for 4 Pair Power over Ethernet |
Transmission properties
Category 6^A (Component) | ISO/IEC 11801, DIN EN 50173-1 |
---|---|
Class E^A (Permanent Link) | ISO/IEC 11801, DIN EN 50173-1 |
Class E^A (Channel) | ISO/IEC 11801, DIN EN 50173-1 |
Class E (Channel with Coupler Cat.6) | - |
Class D (Channel with Coupler Cat.5e) | - |
Gigabit Ethernet acc. to IEEE 802.3 | fulfilled |
10 Gigabit Ethernet acc. to IEEE 802.3an | fulfilled |
Norms
Connectors | IEC 60603-7-51 |
---|
Environmental requirements
Ambient temperature | -40° C to +85° C |
---|
Accessories
![AMJ-S Module Cat.6^A T568A}](/fileadmin/_processed_/0/8/csm_J00029A2000_4c0e8e0896.png)
![AMJ-S Module Cat.6^A T568B}](/fileadmin/_processed_/0/8/csm_J00029A2000_4c0e8e0896.png)
![AMJ-S Module Cat.6^A T568A blister package (24 pcs.)}](/fileadmin/_processed_/3/7/csm_J00029A2110_de81c417d2.png)
![AMJ-S Module Cat.6^A T568B blister package (24 pcs.)}](/fileadmin/_processed_/3/7/csm_J00029A2110_de81c417d2.png)
![AMJ-S DD Module Cat.6^A T568A}](/fileadmin/_processed_/0/8/csm_J00029A2000_4c0e8e0896.png)