19" Patch Panel MPP24-HS K Class EA 500
19" Patch Panel MPP24-HS K Class EA 500
Technical attributes
| Article name | CU-MD MPP24 CEA LSA s |
|---|---|
| Type | 24 x RJ45 shielded |
| Colour | light grey RAL 7035 |
Description of the Series/Product Category
Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.
Performance characteristics
19"/10" rack mount unit 1 HU with 12, 16 or 24 RJ45 jacks assembled on one common PCB
360° shielding can be connected directly on the PCB on a large contact spot using screw clamps, without need of twisting the shielding braid (shielded type)
cables are terminated via IDC (LSA Plus) terminals with colour coding acc. to EIA/TIA 568 A and B
limit of 13 mm max. of untwisted length of wires can be easily achieved without restricting an easy installation
risk of short-circuit between screening braid andwires is minimized due to sufficient space between data terminals and screening contact
Cat.6A, Class EA 500 & Cat.6A types with overbending protection: >750 mating cylces with RJ45/RJ11/RJ12 plugs
modular jacks are numbered on the front panel
housing is made of steel and powder-laminated in light grey (RAL 7035) or black; the cover is made of stainless steel
enclosed cable ties for strain relief of the cables without need of screws and special tools
printed circuit board is mounted horizontally
bonding with the enclosed bonding kit (shielded types)
no special tooling required for mounting of cover (shielded type)
Mechanical attributes
| Insertion force | ≤ 30 N |
|---|---|
| Durability (Matings) | ≥ 750 |
| Conductor diameter | solid 0.41 - 0.64 mm AWG 26/1 - AWG 22/1 |
| Core Diameter | 0,7 - 1,6 mm |
| Material: housing | sheet steel powder coated |
| Material: shielding housing | stainless sheet steel |
| Material: insulators | PA, PBT, PBP, PE |
| Material: PCB | FR4 |
| Material: PCB finish | tin plated |
| Material: contact spring | CuSn, spring steel |
| Material: contact spring finish | min. 0,8 µm Au on 1,2 µm Ni |
| Material: contact IDC termination | CuZn |
| Material: IDC termination finish | tin plated |
Elecrical attributes
| Contact resistance | ≤ 20 mΩ |
|---|---|
| Insulation resistance | ≥ 500 MΩ |
| Voltage proof: contact-contact | ≥ 1000 V, DC |
| Voltage proof: contact-shield | ≥ 1500 V, DC |
| Current carrying capacity at 50°C | 1 A |
| PoE+ acc to IEEE 802.3at | Cat.6A, Cat.6A; Class EA: PoE+; Cat.5e: PoE |
| PoE according to IEEE802.3af | Adequate for 4 Pair Power over Ethernet |
Transmission properties
| Category 6^A (Component) for products Cat.6^A | ISO/IEC 11801, DIN EN 50173-1 |
|---|---|
| Class E^A (Permanent Link) for products Cat.6^A, Cat.6A, Class E^A 500 | ISO/IEC 11801, DIN EN 50173-1 |
| Class E^A (Channel) for products Cat.6^A, Cat.6A, Class E^A 500 | ISO/IEC 11801, DIN EN 50173-1 |
| Category 5e | ISO/IEC 11801, DIN EN 50173-1 |
| Category 3 | - |
| Gigabit Ethernet acc. to IEEE 802.3 | fulfilled |
| 10 Gigabit Ethernet acc. to IEEE 802.3an | fulfilled |
Norms
| Connectors | IEC 60603-7-51 / -7-5 / -7-3 / -7-41 |
|---|
Environmental requirements
| Ambient temperature | -40° C to + 70° C |
|---|
Accessories
