- RJ45 Connections
- RJ45 Connector
The RJ45 connector MFP8-SL is the ideal solution for any application with large headroom in confined spaces. Its robust housing is just 44 mm long – and just 35 mm when mated. It also exceeds the standards specifications by far. Whether in office, data center, industrial or physical security applications or home networks, the MFP8-SL offers maximum flexibility at minimum effort. Installation of the MFP8-SL is quick and easy. It is suitable for 10, 25 and 40 Gigabit Ethernet and thanks to its particularly short housing it can be used also in application where standard RJ45 plugs are simply too long. And thanks to the handy wire manager literally anyone can now install RJ45 plugs.
Telegärtner’s MFP8-SL is the shortest RJ45 plug of the proven MFP8 series. Just 44 mm long – and just 35 mm when mated – it is the ideal solution for any application that needs high data rates but offers only little space. One of the many benefits of the short RJ45 plug is its robust and easy-to-install housing. It can be installed in less than 60 seconds without any special tools. The MFP8-SL is available in Category 6A for 10 Gigabit Ethernet and Category 8.1 for 40 Gigabit Ethernet. It transmits the highest date rate that is specified for structured cabling with copper cables and still offers more than enough headroom.
- very short installation length only 44 mm
- fine-graded cable strain relief for cable Ø up to 9 mm
- increased cable strain relief due to small barbs holding the cable sheath
- long release latch Insertion and withdrawal made easy in confined spaces
- pre-assembled protection cap Effective protection of contacts from dirt and damage in transit also whilst cable assembly
- standardised plug interface according to IEC 60603-7-51
- robust zinc die-cast housing hardened and tempered finish for mechanical protection
- 360° shielding Reliable data transmission even with outside electrical interference
- piercing contacts IPC
- full metal shielding between pairs of wires
- four-chamber wire manager Available with colour code T568A, T568B, PROFINET
Here’s the situation: An existing network needs extending. A cable link needs to be repaired or replaced. A peripheral device needs to be connected quickly. Your customer expects a fast and reliable solution but you don’t have a cable assembly ready at hand. Sound familiar?
Now you can keep cool when faced with such demands – with the field assembly MFP8 RJ45 plug series developed by Telegärtner.
The RJ45 plugs of Telegärtner‘s MPF8 product range have been proving their worth for years in many different applications. Their robust metal housing, the IPC contacts and the enormous headroom ensure reliable transmission.
Performance Characteristics
- Long release latch Insertion and withdrawal made easy in confined spaces
- Pre-assembled protection cap Effective protection of contacts from dirt and damage in transit also whilst cable assembly
- Standardised plug interface according to IEC 60603-7-51
- Robust zinc die-cast housing Hardened and tempered finish to prevent outside electrical interference
- 360° shielding Secure data transmission even with outside electrical interference
- Piercing contacts Suitable for: AWG 27/7 – 22/7; AWG 24/1 – 22/1; AWG 26/19 - 24/19*
- Full metal shielding Between pairs of wires
- Four-chamber wire manager Available with colour code T568A, T568B, PROFINET.
- Piercing contacts IPC Suitable for AWG27/7 – 22/7, AWG26/1 – 22/1, AWG26/19 – 24/19*
Performance Characteristics
- Long release latch Insertion and withdrawal made easy in confined spaces
- Cable entry from 4 directions in 4x90° steps with option for belated changes
- Four-chamber wire manager Available with colour code T568A,T568B, PROFINET
- 360° shielding Secure data transmission even with outside electrical interference
- Pre-assembled protection cap Effective protection of contacts from dirt and damage in transit also whilst cable assembly
- Standardised plug interface according to IEC 60603-7-51
- Robust zinc die-cast housing Hardened and tempered finish to prevent outside electrical interference
- Piercing contacts IPC
suitable for:
AWG27/7 – 22/7
AWG26/1 – 22/1
AWG26/19 – 24/19* - Metallic cable strain relief by means of screw-clamp connection. Suitable for cable from 5.5 mm to 10.0 mm
The Industrial Ethernet variant in the MFP8 family is characterized by two major innovations. In addition to the completely redesigned, elegant housing in full metal design, the MFP8 IE is characterized in particular by an innovative cable gland that allows cable diameters of up to 10 mm to pass through. The parts of the shield housing that can be folded for assembly are attached to the connector housing so that they cannot be lost and enable quick and easy assembly on industrial cables on site. All of this makes the MFP8 IE the ideal solution for installing and repairing modern industrial networks. MFP8, the connector for modern industrial installations for today and tomorrow.
Performance Characteristics
- Long release latch Insertion and withdrawal made easy in confined spaces
- Pre-assembled protection cap Effective protection of contacts from dirt and damage in transit also whilst cable assembly
- Standardised plug interface acc. to IEC 60603-7-81
- Robust zinc die-cast housing Hardened and tempered finish to prevent outside electrical interference
- 360° shielding Secure data transmission even with outside electrical interference
- Piercing contacts IPC suitable for: AWG 27/7 – 22/7; AWG 26/1 – 22/1
- Four-chamber wire manager Available with colour code T568B
- Metallic cable strain relief by means of screwclamp connection. Suitable for cable Ø 5.5 mm to 10.0 mm
Telegärtner is launching the field-assembly cable plug MFP8 Cat.8.1 for building direct-attach links in-between electronic devices or for the assembly of patch cords. The fully-shielded housing made of zinc diecast offers a cable strain relief suitable for cable outer diameter from 5.5 - 10.0 mm and can be assembled onto horizontal or patch cable of Category Cat.8.1/Cat.8.2 with solid or stranded conductors such as AWG27/7 – 22/7 or AWG26/1 – 22/1 with no need for any special tools.
Performance Characteristics
- Long release latch Insertion and withdrawal made easy in confined spaces
- Pre-assembled protection cap Effective protection of contacts from dirt and damage in transit also whilst cable assembly
- Standardised plug interface acc. to IEC 60603-7-81
- Robust zinc die-cast housing Hardened and tempered finish to prevent outside electrical interference
- 360° shielding Secure data transmission even with outside electrical interference
- Piercing contacts IPC suitable for: AWG 27/7 – 22/7; AWG 26/1 – 22/1
- Four-chamber wire manager available with colour code T568A, T568B, PROFINET
- Metallic cable strain relief by means of screwclamp connection. Suitable for cable Ø 5.5 mm to 10.0 mm
The new field assembly MFP8 is the number one choice whenever efficient and reliable connections are needed without major expense or effort, whether for classic cabling systems in office buildings, data centers, in industry or for home cabling systems. Needless to say, it also supports High Power over Ethernet plus (PoE+).
