STX RJ45 plug insert AWG24-27 Cat.6A
STX RJ45 plug insert AWG24-27 Cat.6A
Technical attributes
| Article name | CU-CN STXRJ45insert 24-27 C6A |
|---|---|
| Description | STX RJ45 plug insert Cat.6A |
| Solid/Stranded | AWG24-27 |
Downloads
Description of the Series/Product Category
Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.
Modern industrial and building wiring envisions linking the office network with the manufacturing network andits subordinate production cells and machinery. The applicable standard for this, ISO/IEC 24702 resp. EN 50173-1 and -3, are intended for situations with a high level of bidirectional traffic between the administration and manufacturing areas whereby realtime transmissions with high security, 100% availability and simultaneous high investment security must all be guaranteed. The increasing interconnection of machinery, equipment and measuring instruments in the production area using connectors already known from office wiring applications demands that these be adapted to the higher stresses presented by the contamination-prone, rough industrial environment. Aside from a variety of RJ45, IP67 M12 D- and X-coded connectors, Telegärtner therefore also offers designs for connecting glass and polymer fibres in order to meet this challenge.
Performance characteristics
pre-assembled protection cap
robust zinc diecast housing
360° shielding
full metal shielding between pairs of wires
three strain relief settings (cable diameters 5.0 mm to 9.0 mm)
can be assembled in 60 seconds without any special tools
optimised for the field, including demanding applications
secure transmission even with outside interference
four-chamber wire manager (available with colour code T568A or T568B and PROFINET)
suitable for cabling in office buildings, data centers, industrial facilities and home networks
supreme reliability
ideal for network repairs, special lengths and extensions
piercing contacts suitable for solid and stranded conductors
Mechanical attributes
| Insertion force | ≤ 30 N |
|---|---|
| Durability (Matings) | ≥ 750 |
| Reusable contacts | ≤10 cycles |
| Cu-Conductor diameter: solid | 0.36 - 0.51 mm AWG 27/1 - AWG 24/1 |
| Cu-Conductor diameter: stranded | 0.46 - 0.61 mm AWG 27/7 - AWG 24/7 |
| Mating Requirements Cu-Conductor diameter: stranded | 0.61 - 0.78 mm (AWG24-22/19) |
| Core Diameter | 0,8 - 1,1 mm |
| Material: contacts | phosphor bronze |
| Material: contact finish | min. 0,8 µm Au on 2,54 µm Ni |
| Material: connector housing | PC UL94 V0 crystal clear |
| Material: PCB | FR4 UL 94 V0 |
| Material: piercing contacts | phosphor bronze tinned |
| Material: shield contact | brass, nickel-plated |
| Material: wire pair presorting | PC UL94 V0 white |
| Material: uplock hook | PBT UL94 V0 |
| Material: shielding housing | zinc diecast, nickel-plated |
| Material: cable clamp | PBT UL94 V0 |
| Material: protection cap | PBT UL94 V0 |
| Cable diameter | 5.0 - 7.3 mm |
| Material: contacts | Phosphorbronze |
| Material: shield | 0.5 mm brass |
| Material: shield finish | 2 µm Ni |
Thermal and climatic attributes
| UL | E244889 |
|---|---|
| Temperature range [°C] | -40/ 70 |
Elecrical attributes
| PoE+ acc to IEEE 802.3at | fulfilled |
|---|---|
| Current carrying capacity at 50°C | 1 A |
Transmission properties
| 10 Gigabit Ethernet acc. to IEEE 802.3an | fulfilled |
|---|---|
| Category 6^A (Component) | ISO/IEC 11801, DIN EN 50173-1 |
| Class E^A (Channel) | ISO/IEC 11801, DIN EN 50173-1 |
Norms
| Connectors | IEC 60603-7-51 |
|---|---|
| Degrees of protection provided by enclosures (IP code) | IEC 60529 |
| Generic cabling systems | ISO/IEC 11801; EN 50173-1; ISO/IEC 24702; IEC 61918 |
