Outlet UMJ45 8/8 K Up/50 Cat.6A alpine white

Item number: 100022962(Old item number J00020A0508)

Outlet UMJ45 8/8 K Up/50 Cat.6A alpine white

Illustration can deviate

Technical attributes

Article name	CU-Out UMJ45 8/8K UP/50 C6A cduct alpwt
Type	cable duct mounting, 2xRJ45
Colour	alpine white

Downloads

assembly instruction assembly instruction data sheet

Description of the Series/Product Category

Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.

Performance characteristics

unshilded
stable, compact, ergonomic construction, that provides secure hold during installation
1-way (8) and 2-way outlets (8/8, 2x8(4)) available
Independent AP design available, an AP add-on set is not required
Independent AP design available, an AP add-on set is not required
conventional cable ties that are part of the standard delivery provide strain relief for cables
flush mounting type: cable infeed through centric cable strain relief from eight directions in 45° increments
surface mounting type: cable infeed from four directions in 90° increments
can be installed either horizontally or vertically in the cable duct using a four-hole bearer ring and freely selectable cable infeed
1-way (8) and 2-way outlets (8/8, 2x8(4)) available
types with low installation depth (29 mm); can be installed in floor tank without problems
can be combined with covers of a wide variety of switching programs
Independent AP design available, an AP add-on set is not required
protection flaps can be retrofitted; on request, can be delivered already integrated to the customer's specifications
Cover plate can be retrofitted with a flip-up loss-proof, transparent label field, or can be delivered preinstalled according to the customer's specifications

Mechanical attributes

Insertion force	≤ 20 N
Material: housing UMJ45	PA
Life (mating cycles RJ45, RJ12, RJ11)	≥ 750
Conductor diameter	solid 0,40 - 0,65 mm AWG 26/1 - AWG 22/1
Material: insulators	PBT, ABS
Material: PCB	FR4
Core Diameter	0,7 - 1,6 mm
Material: PCB finish	tin plated
Material: contact spring	CuSn, spring steel
Material: contact spring finish	min. 0,8 µm Au on 1,2 µm Ni
Material: contact IDC termination	CuZn
Material: IDC termination finish	tin plated

Elecrical attributes

Contact resistance	≤ 20 mΩ
Insulation resistance	≥ 500 MΩ
Voltage proof: contact-contact	≥ 1000 V, DC
Voltage proof: contact-shield	≥ 1500 V, DC
Current carrying capacity at 50°C	1 A
PoE+ acc to IEEE 802.3at	Cat.6A
PoE according to IEEE802.3af	Cat.5e
PoE according to IEEE802.3af	Adequate for 4 Pair Power over Ethernet

Transmission properties

10 Gigabit Ethernet acc. to IEEE 802.3an	for Cat.6A
Cat.6A	PL acc. to ANSI/TIA/EIA-568-B.2-10
Class EA	ISO/IEC 11801:2002 FPDAM2:2009; ISO/IEC 11801:2002+A1:2008
Cat.6	ISO/IEC 11801, EN 50173-1
Class E	ISO/IEC 11801, EN 50173-1
Channel Class E	ISO/IEC 11801, EN 50173-1
Gigabit Ethernet acc. to IEEE 802.3	Adequate for Gigabit Ethernet
Category 5e	ISO/IEC 11801, EN 50173-1