Mini Distributor MPD12-HS K Cat.6^A

Item number: 100007000(Old item number J02022A0055)

Mini Distributor MPD12-HS K Cat.6_A - 3 HU / 10 PU

Illustration can deviate

Technical attributes

Article name	CU-MD MPD12 C6A LSA s
Type	shielded, mounting onto mounting rail TH35 without adapter, 12x RJ45, 3 HU / 10 PU
Colour	front panel anodized aluminium

Downloads

tender text (GAEB)tender text (Word)Certificate assembly instruction assembly instruction data sheet product brochures

Description of the Series/Product Category

Notice: The following information refer to the series/product category as a whole. Please see the specific datasheet for specific technical information of a particular product.

Networks which have a small number of subscirbers require simple and cost-effective distributors without 19" racks and separate EDP rooms. For this purpose we have developed distributors which are suitable as cable distributors or as connection devices for groups of participants at their workdesk. Up to 12 subscribers can be connected using shielded or unshielded installation cabling. The cables can be led into the housing from behind or from below. The distributor can be affixed to the wall, in a cable duct or simply placed on to the desk. A 19" rack mount version (with 3 HU) is also available.

Performance characteristics

360 degrees shielding of MPD-HS can be connected directly on the PCB on a large contact spot using a screw clamp without need of twisting the braid
shielding cover made of stainless steel
cables are terminated via IDC (LSA Plus) terminals with colour coding acc. to EIA/TIA 568A and B
limit of 13 mm max. of untwisted length of wires can be easily achieved without restricting an easy installation
Cat.6_A- & Cat.6A types with overbending protection: suitable for 6- (RJ11/12) and 8-pin connectors (RJ45); can be used in the modular jack without additional installation kits.
19" rack-mount design size 3 HU/7 PU with 6xRJ45 and 3 HU/10 PU with 12xRJ45 available, front plate anodized aluminium
housing made of thermoplastic, halogene-free, with non-slip bumpers
enclosed cable ties for strain relief of the cables without need of screws and special tools
printed circuit board is mounted horizontally in the housing, shielded versions are provided inside with a metal shielding cover; in addition, a bonding cable can be connected to the PCB (with screw M4)
Mini distributor MPD6, MPD8 MPD12 with 6, 8 or 12 RJ 45 jacks assembled on one common PCB
Mini distributors MPD8 AMJ/UMJ and MPD12 AMJ/UMJ for 8 resp. 12 AMJ-S/AMJ/UMJ modules or couplers
no special tooling required for mounting of cover (shielded type)

Mechanical attributes

Insertion force	≤ 30 N
Durability (Matings)	≥ 750
Conductor diameter	solid 0.41 - 0.64 mm AWG 26/1 - AWG 22/1
Core Diameter	0,7 - 1,6 mm
Material: housing mini distributor	ABS
Material: housing mini distributor 3HU	stainless sheet steel
Material: shielding housing	stainless sheet steel
Material: insulators	PBT
Material: PCB	FR4
Material: PCB finish	tin plated
Material: contact spring	phosphor bronze tinned
Material: contact spring finish	min. 0,8 µm Au on 1,2 µm Ni
Material: contact IDC termination	CuZn
Material: IDC termination finish	tin plated

Elecrical attributes

Contact resistance	≤ 20 mΩ
Insulation resistance	≥ 500 MΩ
Voltage proof: contact-contact	≥ 1000 V, DC
Voltage proof: contact-shield	≥ 1500 V, DC
Current carrying capacity at 50°C	1 A
PoE+ acc to IEEE 802.3at	Cat.6_A, Cat.6A; Cat.6/Class E: PoE+
PoE according to IEEE802.3af	Adequate for 4 Pair Power over Ethernet

Transmission properties

Category 6^A (Component) for products Cat.6^A	ISO/IEC 11801, DIN EN 50173-1
Class E^A (Permanent Link) for products Cat.6^A, Cat.6A, Class E^A 500	ISO/IEC 11801, DIN EN 50173-1
Class E^A (Channel) for products Cat.6^A, Cat.6A, Class E^A 500	ISO/IEC 11801, DIN EN 50173-1
10 Gigabit Ethernet acc. to IEEE 802.3an	10 Gigabit Ethernet according to IEEE 802.3an for Cat.6_A